LED Indicator ...............................34 Driver .................................35 Monitor Driver ..............................35 Windows 2000 ............................35 Windows ME............................35 Windows XP ............................36 Windows Vista ............................39 Windows 7 ............................41 Windows 8 ............................45 i-Menu .................................49 e-Saver................................50 Screen+ ...............................51 Troubleshoot...............................52 Specification ...............................54 General Specification (G2477FXQ) ......................54 General Specification (G2777FXQ) ......................55...
Page 3
FCC Notice ..............................60 WEEE Declaration............................60 WEEE Declaration for India..........................60 EPA Energy Star(Optional) ........................61 TCO DOCUMENT ............................62 Service ................................63 AOC International (Europe) B.V........................67 Warranty Statement for North & South America (excluding Brazil) ............68 EASE PROGRAME .............................70...
Safety National Conventions The following subsections describe notational conventions used in this document. Notes, Cautions, and Warnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE indicates important information that helps you make better use of your computer system.
For use only with the attached power adapter which have CE,UL,CSA listed license (Only for monitors with power adapter). Factory: G2477FXQ TPV ELECTRONICS(FUJIAN) CO., LTD Model : ADPC1245 (Output 12V) L&T Display Technology(Fujian)LTD Model: ADPC1245 (Output 12V) SHENZHEN HONOR ELECTRONIC CO.,LTD Model:ADS-65LSI-12-1 12045G (Output 12V) G2777FQ TPV ELECTRONICS(FUJIAN) CO., LTD Model : ADPC1965 (Output 19V)
Installation Do not place the monitor on an unstable cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product.
Cleaning Clean the cabinet regularly with cloth. You can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. When cleaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface.
Other If the product is emitting a strange smell, sound or smoke, disconnect the power plug IMMEDIATELY and contact a Service Center. Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation. Do not knock or drop the monitor during operation or transportation.
Analog Cable HDMI Cable USB Cable Audio Cable DP Cable Not all signal cables (Analog , Audio,, USB, DP, MHLand HDMI cables) will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation.
Adjusting Viewing Angle For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor when you change the monitor's angle. You are able to adjust the monitor's angle from -3°...
Connecting the Monitor Power Analog (D-Sub 15-Pin VGA cable) HDMI Audio in Earphone out Display port HDMI/MHL To protect equipment, always turn off the PC and LCD monitor before connecting. Connect the power cable to the AC port on the back of the monitor. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer's D-Sub port.
Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for instructions on attaching it to the wall. Noted : VESA mounting screw holes are not available for all models, please check with the dealer or official department of AOC.
Adjusting Setting Optimal Resolution Windows 8 For Windows 8: • Right click and click All apps at the bottom-right of the screen. • Set the "View by" to "Category". • Click "Appearance and Personalization".
Page 16
• Click "DISPLAY". Set the resolution SLIDE-BAR to Optimal preset resolution •...
• Click on the "Change display settings" button. • Set the resolution SLIDE-BAR to Optimal preset resolution Windows Vista For Windows Vista: 1 Click START. 2 Click CONTROL PANEL. 3 Click Appearance and Personalization.
6 Click SETTINGS. 7 Set the resolution SLIDE-BAR to Optimal preset resolution Windows ME/2000 For Windows ME/2000: 1 Click START. 2 Click SETTINGS. 3 Click CONTROL PANEL. 4 Double click DISPLAY. 5 Click SETTINGS. 6 Set the resolution SLIDE-BAR to Optimal preset resolution...
Hotkeys Source/Auto/Exit Game Mode/< Volume/ > Menu/Enter Power Power Press the Power button to turn on/off the monitor. Game Mode/< When there is no OSD, press “<”key to open game mode function, then press “<” or “>” to select game mode (FPS, RTS, Racing, Gamer 1, Gamer 2 or Gamer 3) basing on the different game types.
Using "MHL(Mobile High-Definition Link)"(Optional) 1."MHL" (Mobile High-Definition Link) This feature allows you to enjoy videos and photos (imported from a connected mobile device that supports MHL) on the screenof the product. To use the MHL function, you need an MHL-certified mobile device. You can check if your mobile device is ...
OSD Setting Basic and simple instruction on the control keys. Press the MENU-button to activate the OSD window. Press < or > to navigate through the functions. Once the desired function is highlighted, press the MENU-button to activate. Press < or > to navigate through the sub-menu. Once the desired function is highlighted, press MENU-button to activate.
Luminance 1 Press MENU-button to display menu. 2 Press Left or Right to select (Luminance), and press MENU-button to enter. 3 Press Left or Right to select submenu, and press MENU-button to enter. 4 Press Left or Right to adjust. 5 Press Auto-button to exit Brightness 0-100...
Image Setup 1 Press MENU-button to display menu. 2 Press Left or Right to select (Image Setup), and press MENU-button to enter. 3 Press Left or Right to select submenu, and press MENU-button to enter. 4 Press Left or Right to adjust. 5 Press Auto-button to exit Clock 0-100...
Color Setup 1 Press MENU-button to display menu. 2 Press Left or Right to select (Color Setup), and press MENU-button to enter. 3 Press Left or Right to select submenu, and press MENU-button to enter. 4 Press Left or Right to adjust. 5 Press Auto-button to exit Warm Recall Warm Color Temperature from EEPROM.
Picture Boost 1 Press MENU-button to display menu. 2 Press Left or Right to select (Picture Boost), and press MENU-button to enter. 3 Press Left or Right to select submenu, and press MENU-button to enter. 4 Press Left or Right to adjust. 5 Press Auto-button to exit Frame Size 14-100...
OSD Setup 1 Press MENU-button to display menu. 2 Press Left or Right to select (OSD Setup), and press MENU-button to enter. 3 Press Left or Right to select submenu, and press MENU-button to enter. 4 Press Left or Right to adjust. 5 Press Auto-button to exit Language Select the OSD language...
Game Setting Press MENU-button to display menu. Press Left or Right to select (Game setting), and press MENU-button to enter. Press Left or Right to select submenu, and press MENU-button to enter. Press Left or Right to adjust. Press AUTO-button to exit For playing FPS (first Person Shooters) games.
Extra 1 Press MENU-button to display menu. 2 Press Left or Right to select (Extra), and press MENU-button to enter. 3 Press Left or Right to select submenu, and press MENU-button to enter. 4 Press Left or Right to adjust. 5 Press AUTO-button to exit Auto/D-SUB/HDMI1(MHL1)/HDMI Select input signal source.
Exit 1 Press MENU-button to display menu. 2 Press Left or Right to select (Exit), and press MENU-button to enter. 3 Press Auto-button to exit Exit Exit the main OSD.
Driver Monitor Driver Windows 2000 1. Start Windows® 2000 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5.
Windows XP 1. Start Windows® XP 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Select and click on the category ‘Appearance and Themes’ 4. Click on the 'Display' Item.
Page 37
5. Select the 'Settings' tab then click on the 'Advanced' button. 6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active, click on 'Properties' button. Please follow the steps below.
Page 38
8. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button. 9. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button. 10.
Windows Vista 1. Click "Start " and "Control Panel". Then, double-click on "Appearance and Personalization". 2. Click "Personalization" and then "Display Settings". 3. Click "Advanced Settings...".
Page 40
4. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is. If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue". 5.
Windows 7 1.Start Windows® 7 2.Click on the 'Start' button and then click on 'Control Panel'. 3. Click on the 'Display' icon.
Page 42
4.Ckick on the “Change display settings” button. “ Click the Advanced Settings” button. button. Click the “Monitor” tab and then click the “Properties”...
Page 43
7.Click the “Driver” tab. 8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver... “and then click the "Browse my computer for driver software" button. 9. Select "Let me pick from a list of device drivers on my computer".
Page 44
10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive). 11. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button. 12.
Windows 8 Start Windows® 8 Right click and click All apps at the bottom-right of the screen. Click on the “Control panel” icon Set the “View by” to “Large icons” or “Small icons”. Click on the “Display” icon.
Page 46
Click on the “Change display settings” button. “ Click the Advanced Settings” button. button Click the “Monitor” tab and then click the “Properties”...
Page 47
Click the “Driver” tab. 10. Open the “Update Driver Software-Generic PnP Monitor” window by clicking on “Update Driver... “ and then click the "Browse my computer for driver software" button. 11. Select "Let me pick from a list of device drivers on my computer".
Page 48
12. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X:\Driver\module name (where X is the drive letter designator for the CD-ROM drive). 13. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button. 14.
Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust your monitor display setting by using on screen menus instead of the OSD button on the monitor. To complete installation, please follow the installation guide.
Welcome to use AOC e-Saver monitor power management software! The AOC e-Saver features Smart Shutdown functions for your monitors, allows your monitor to timely shutdown when PC unit is at any status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see example below).
Screen+ Welcome to "Screen+" software by AOC, Screen+ software is a desktop screen splitting tool, it splits the desktop into different panes, each pane displays a different window. You only need to drag the window to a corresponding pane, when you want to access it. It supports multiple monitor display to make your task easier. Please follow the...
Adjust the maximum resolution and frequency that the monitor can handle properly. Make sure the AOC Monitor Drivers are installed. Adjust the Contrast and Brightness Controls. Press to auto adjust.
Page 53
Use Windows 95/98/2000/ME/XP shut-down mode Adjust CLOCK and Horizontal vertical FOCUS. disturbances on the screen Press to auto-adjust. Use I-menu software from CD(or download from AOC official website), select “reset” option to adjust. Display not on whole screen in default resolution ration...
Specification General Specification (G2477FXQ) Product name G2477FXQ Driving system TFT Color LCD Viewable Image Size 60.47cm diagonal Pixel pitch 0.2745(H)mm x 0.2745(V)mm Panel Video R, G, B Analog lnterface & Digital Interface Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 148.5MHz...
General Specification (G2777FQ) Product name G2777FQ Driving system TFT Color LCD Viewable Image Size 68.6cm diagonal Pixel pitch 0.3114mm(H)X0.3114mm(V) Panel Video R, G, B Analog lnterface ,HDMI,MHL,DP Separate Sync. H/V TTL Display Color 16.7M Colors Dot Clock 148.5MHz Horizontal scan range 30 kHz - 83 kHz Horizontal scan Size(Maximum) 597.888mm...
Preset Display Modes Standard Resolution H. Frequency (kHz) V. Frequency (Hz) 640 X 480@60Hz 31.469 59.940 640 X 480@72Hz 37.861 72.809 640 X 480@75Hz 37.500 75.000 IBM MODE DOS 720 X 400@70Hz 31.469 70.087 800 X 600@56Hz 35.156 56.250 800 X 600@60Hz 37.879 60.317 SVGA...
Pin Assignments 15-Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name Video-Red Video-Green Ground Video-Blue N.C. N.C. DDC-Serial data Detect Cable H-sync GND-R V-sync GND-G DDC-Serial clock GND-B...
Page 58
19-Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name Signal Name TMDS Data 2+ TMDS Data 0 DDC/CEC Ground TMDS Data 2 Shield TMDS Clock + +5V Power TMDS Data 2 TMDS Clock Shield Hot Plug Detect TMDS Data 1+ TMDS Clock TMDS Data 1Shield...
Plug and Play Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities.
Regulation FCC Notice FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
WEEE Declaration Disposal of Waste Equipment by Users in Private Household in the European Union. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste.Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment.The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
Bangalore, Karnataka, PIN: 560048, Tel: 080-3023-1000 E-mail: serviceindia@aoc.com EPA Energy Star(Optional) ENERGY STAR® is a U.S. registered mark. As an ENERGY STAR® Partner, AOC International (Europe) BV and Envision Peripherals, Inc. have determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
The freight cost for the warranty is pre-paid by AOC for the delivery and return. Please ensure you provide a dated proof of purchase along with the product and deliver to the AOC Certified or Authorized Service Center under the following condition: ...
Page 64
If your warranty has expired, you still have access to all available service options, but you will be responsible for the cost of service, including parts, labor, shipping (if any) and applicable taxes. AOC Certified or Authorized Service Center will provide you with an estimate of service costs before receiving your authorization to perform service.
Page 65
During this period, AOC International (Europe) B.V. offers a Carry-In (return to Service Center) Warranty Support at an AOC’s Authorized Service Center or Dealer and at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below. As a Standard Policy,...
Page 66
Any cause other than ordinary commercial or industrial application Adjustment by non-authorized source Repair, modification, or installation of options or parts by anyone other than an AOC Certified or Authorized Service Center Improper environments like humidity, water damage and dusts ...
No manufacturer can guarantee that all panels will be free from pixel defects, but AOC guarantees that any monitor with an unacceptable number of defects will be repaired or replaced under warranty. This Pixel Policy explains the different types of pixel defects and defines acceptable defect levels for each type.
In the United States and Canada contact your Dealer or EPI Customer Service, RMA Department at the toll free number (888) 662-9888. Or you can request an RMA Number online at www.aoc.com/na-warranty. * This limited warranty does not cover any losses or damages that occur as a result of:...
Page 69
ARGENTINA: http://ar.aoc.com/support/warranty BOLIVIA: http://bo.aoc.com/support/warranty CHILE: http://cl.aoc.com/support/warranty COLOMBIA: http://co.aoc.com/warranty COSTA RICA: http://cr.aoc.com/support/warranty DOMINICAN REPUBLIC: http://do.aoc.com/support/warranty ECUADOR: http://ec.aoc.com/support/warranty EL SALVADOR: http://sv.aoc.com/support/warranty GUATEMALA: http://gt.aoc.com/support/warranty HONDURAS: http://hn.aoc.com/support/warranty NICARAGUA: http://ni.aoc.com/support/warranty PANAMA: http://pa.aoc.com/support/warranty PARAGUAY: http://py.aoc.com/support/warranty PERU: http://pe.aoc.com/support/warranty URUGUAY: http://pe.aoc.com/warranty VENEZUELA: http://ve.aoc.com/support/warranty IF COUNTRY NOT LISTED: http://latin.aoc.com/warranty...
Tube & LCD Panel) *AOC will need to obtain a credit card number if you would like to get a new AOC monitor advanced shipped to your location, prior to the defective unit arriving at AOC’s service center. If you do not wish to supply a credit card, AOC will only ship the new monitor, once the defective unit arrives at the AOC service center.