Removing A Disc With The Computer On; Removing A Disc With The Computer Off; Toshiba's Online Resources - Toshiba Satellite Pro L40 Series User Manual

78
Learning the Basics

Toshiba's online resources

Removing a disc with the computer on

To remove an optical disc with the computer turned on:
1 Press the eject button on the drive.
2 Pull the tray out until it is fully open, remove the disc, and
place it in its protective cover.
3 Gently press the tray in to close it.

Removing a disc with the computer off

To remove a disc with the computer turned off:
1 Insert a slender object, such as a straightened paper
clip, into the manual eject hole.
The disc tray slides partially out of the drive.
2 Pull the tray out until it is fully open, remove the disc, and
place it in its protective cover.
3 Gently press the tray in to close it.
Toshiba's online resources
Toshiba maintains a number of online sites to which you can
connect. These sites provide information about Toshiba
products, give help with technical questions and keep you
up to date with future upgrades. For more information, see
"Contacting Toshiba" on page
Do not press the eject button while the drive in-use
indicator light is glowing. Doing so could damage the
disc or the drive.
Also, if the disc is still spinning when you open the disc
tray, wait for it to stop spinning before you remove it.
Never use a pencil to press the manual eject button.
Pencil lead can break off inside the computer and
damage it.
150.