Table of Contents
Advertisement
Linksys
Linksys
Inventory—Whether Inventory TLV is transmitted
•
STEP 2 The message at the top of the page indicates whether the generation
of the LLDP MED Network Policy for the voice application is
automatic or not (see LLDP Overview) Click on the link to change the
mode
STEP 3 To associate additional LLDP MED TLV and/or one or more user-
defined LLDP MED Network Policies to a port, select it, and click Edit
STEP 4 Enter the parameters:
Port—Select the interface to configure
•
LLDP MED Status—Enable/disable LLDP MED on this port
•
Available Optional TLVs—Select the TLVs that can be published by the
•
device by moving them from the Advertise Optional TLVs list
Available Network Policies—Select the LLDP MED policies to be
•
published by LLDP by moving them from the Available Network Policies
list These were created in the LLDP MED Network Policy page To include
one or more userdefined network polices in the advertisement, you must
also select Network Policy from the Available Optional TLVs
NOTE:
The following fields must be entered in hexadecimal characters in the exact
data format that is defined in the LLDP-MED standard (ANSI-TIA-1057_final_
for_publication pdf ):
Location Coordinate—Enter the coordinate location to be published
•
by LLDP
Location Civic Address—Enter the civic address to be published
•
by LLDP
Location (ECS) ELIN—Enter the Emergency Call Service (ECS) ELIN
•
location to be published by LLDP
STEP 5 Click Apply The LLDP MED port settings are written to the Running
Configuration file
LLDP Local Information
To view the LLDP local port status advertised on a port:
STEP 1 Click Configuration > Port Management > Discovery - LLDP > LLDP
Local Information
STEP 2 Select the desired port from the Port list
This page displays the following groups of fields (the actual fields displayed
depend on the optional TLVs selected to be advertised):
Global
Chassis ID Subtype—Type of chassis ID (For example, the MAC address )
•
Chassis ID—Identifier of chassis Where the chassis ID subtype is a MAC
•
address, the MAC address of the device appears
System Name—Name of device
•
System Description—Description of the device (in alpha-numeric format)
•
Supported System Capabilities—Primary functions of the device, such as
•
Bridge, WLAN AP, or Router
Enabled System Capabilities—Primary enabled function(s) of the device
•
Port ID Subtype—Type of the port identifier that is shown
•
Port ID—Identifier of port
•
Port Description—Information about the port, including manufacturer,
•
product name and hardware/software version
Management Address
Displays the table of addresses of the local LLDP agent Other remote
managers can use this address to obtain information related to the local
device The address consists of the following elements:
Address Subtype—Type of management IP address that is listed in the
•
Management Address field; for example, IPv4
Address—Returned address most appropriate for management use
•
Interface Subtype—Numbering method used for defining the
•
interface number
Interface Number—Specific interface associated with this
•
management address
MED Information
Capabilities Supported—MED capabilities supported on the port
•
Current Capabilities—MED capabilities enabled on the port
•
Table of Contents
Table of Contents
35
35
Advertisement
Table of Contents
