Dynamic Bass System Connection (Subwoofer) - Sony TRINITRON KV-20FA210 Service Manual

Dynamic Bass System Connection (Subwoofer)

• Disconnect the TV before connecting the Dynamic Bass Response System.
• Do not connect anything other than the KV-27FA210 Sony TV to the Dynamic Bass
Response System (SUBWOOFER +/-) inputs.
1
Introduce the support bolt of the Dynamic Bass Response System into the guide located
on top of the TV.
2
Connect the Dynamic Bass Response System cables (supplied) to the indicated inputs of
the TV rear panel. Connect the gray cable to the SUBWOOFER
the black cable to the SUBWOOFER
Use only the supplied cables, otherwise your TV will not work.
3
Once installation is complete, plug the TV's AC powercord into the wall socket.
Do not plug in the AC powercord until the subwoofer is completely installed.
Dynamic Bass Response System
Bolt
Guide
(black input). See illustration below.
1 3
AUDIO
AUDIO
Connecting Your TV
(gray input). Connect
Subwoofer + (gray)
Subwoofer - (black)
11