Using The Timer Menu - Sony TRINITRON KV-20FA210 Service Manual

Operating Instructions
Using the Timer
To access the Timer menu, use the following steps:
To Display To Highlight
Current Time Set your TV to the current day and time. Press
Time menu:
1
2
You must set the Current Time before you can use Timer 1 or Timer 2.
Timer 1 and Use the timers to program your TV to turn on and off by day, time,
Timer 2 duration, and channel. The timer duration is a maximum of six hours.
Scheduled
When the channel is fixed, it is not necessary to set the channel.
viewing
1
2
3
Select Off to turn off the Timer. Your previous settings will be saved.
When you perform Auto Program, Timer 1 and Timer 2 settings will be cleared. Also, in the event of
any loss of power, Current Time, Timer 1, and Timer 2 settings will be cleared.
36
Menu
To Select
F f
Use the or buttons to enter the correct day and time, then press
Press to exit the menu.
F f
Use the or buttons to highlight Timer 1 or Timer 2, then press
F f
Use the or buttons to enter the desired day, start time, duration,
and channel, then press
Timer has been set, and the timer light on the front panel of the TV
should be on.
Press to exit the menu.
Timer
Timer 1 : Set
Timer 2 : Set
Current Time
Move
Select
to open the Current
. The timer status should be On when the
End
.
.