Philips Norelco User Manual page 26

ENGLISH
28
1
2
_S9721.indd 28
C
5 Hold the shaver head side down above the
shaver holder.
C
6 Place the shaver into the holder (1), push
3
shaver back (2) and press down the top
cap to connect the shaver (3) (click).
The shaver will only fit in the SmartClean System
in one direction.
7 The battery symbol slowly blinks to
indicate shaver is charging.
8 Press the ON/OFF button on the
SmartClean System to start the cleaning
cycle.
C
9 The cleaning symbol will light up
continuously.
◗ The cleaning cycle takes approximately 10
minutes. The progress bar shows the progress
of the cleaning cycle.
C
◗ During the drying phase, the drying symbol
lights up continuously.
±4 hrs.
◗ The drying phase takes approximately 4 hours.
The progress bar shows the progress of the
drying cycle.
◗ Do not press the ON/OFF button while the
cleaning cycle is running. If this does occur, the
cleaning cycle will stop and the cleaning or
12/15/14 3:32 P