IBM eServer 445 xSeries Hardware Maintenance Manual And Troubleshooting Manual page 140

3. Connect the SMP Expansion cables to the primary server:
Figure 81. Routing cables through the cable management arm
130
xSeries 445 Type 8870: Hardware Maintenance Manual and Troubleshooting Guide
a. Connect one end of a 2.5 m (8.2 ft) SMP Expansion cable to port 1 of SMP
Expansion Module 0 on the primary server; then, route the cable through the
cable-management arm.
b. Connect one end of a 2.5 m (8.2 ft) SMP Expansion cable to port 2 of SMP
Expansion Module 0 on the primary server; then, route the cable beside the
first cable in the cable-management arm.
Cable-management arm
Long SMP expansion cable