Rockford Fosgate Fanatic P FNP2401x Operation & Installation page 8

fanatic P Crossover Connections
Negative (Black Wire)
–
+
Positive (Black/White Stripe Wire)
(One channel of amplifier)
• Be Sure to Maintain Speaker Polarity
fanatic X Crossover Connections
0db Tweeter Level
-3db Tweeter Level
(One channel of
amplifier)
fanatic Q Crossover Connections
0db Tweeter Level
-3db Tweeter Level
-6db Tweeter Level
(One channel of
amplifier)
- + - +
INPUT TWEETER
+
–
+
–
0° 180°
- + - +
INPUT TWEETER
+
–
+ –
• Be sure to maintain speaker polarity
• 0dB tweeter level matches the
amplitude of the tweeter to the
midrange
• –3dB tweeter level reduces the
amplitude –3dB lower than the
midrange (ideal for tweeters located
high in door panel and midranges
located low in kick panel)
• Replaceable Tweeter Protection Bulb
The light bulb acts as a fuse to protect
against overload. If the bulb burns out,
remove the burned out bulb and insert
a new bulb (part# HDW10932) into
the retainer clips.
• Be sure to maintain speaker polarity
• 0dB tweeter level matches the amplitude
of the tweeter to the midrange
• –3dB/–6dB tweeter level reduces the
amplitude –3dB or –6dB lower than the
midrange (ideal for tweeters located high
in door panel and midranges located low
in the kick panel)
° °
• 0 /180 tweeter phase matches the
phase response of the tweeter to the
midrange. Leave the switch in the
position that results in the best sound
quality.
• Replaceable Tweeter Protection Bulb
The light bulb acts as a fuse to protect
against overload. If the bulb burns out,
remove the burned out bulb and insert a
new bulb (part# HDW10932) into the
retainer clips.
– 5 –
Tweeter Positive +
–
Tweeter Negative