Upgrade; Update - Stanley QEL 200 EL Series User Manual

Upgrade

Stand-Alone System to Wireless System
To upgrade your EL Series from a Stand-Alone system to a Wireless System, please visit
www.stanleysecuritysolutions.com/el or contact your Stanley distributor.

Update

To update your Gateway's software or to update the Lockset firmware, you must revisit
the Gateway Configuration Site:
1
If you are a PC User, Go to Start > Network and double click on the Stanley QEW
Gateway icon or enter the Gateway's default IP Address (169.254.10.1) into your
chosen browser.
2
Click on UPDATE.
3
You may either update the Gateway or Lockset.
Note
Continue to check online for the most up-to-date instructions, templates, and
guides at www.stanley-securitysolutions.com/el.
Replace, Update, & Upgrade
46