Install Wireless Locksets - Stanley QEL 200 EL Series User Manual

Install Wireless Locksets

Steps
1
Check Installation Settings
2
Document Lockset Identification
3
Prepare Doors
4
Install Wireless Locksets
Check Installation Settings
Locksets are for use inside protected areas. For other applications (such as outdoor use),
contact the factory for the appropriate NEMA enclosure. Changes or modifications
not expressly approved by Stanley Security Solutions could void the user's authority to
operate the equipment. Make sure to check temperature. Stanley locks will work from
-31°F to 151°F.
Note
Locksets work within a temperature range of -31°F to 151°F. Extreme heat
reduces wireless signal strength and may cause a loss of connectivity.
Document Lockset Identification
The MAC Address will be needed to locate the lockset in the Gateway and ACS.
1
W
Prepare Doors
Use the template provided with the lockset package to prepare the installation. You can
also find the template at www.stanleysecuritysolutions.com/el.
Wireless System
Model: ZICM357SPO-1
FCC ID: W7Z-ZICM357SPO
IC: 8254A-ZICM357SPO
M:000BDA9
Record MAC Address (i.e. BDA9) and location of lockset.
Lot: 121BG
36