Maintenance - Clarke C2K Series Operator's Manual

Page -26 -

MAINTENANCE

WARNING: Maintenance must be done by
authorized personnel only.
CAUTION: Keep all adjustments according
to specifications.
Maintenance Instructions
Return the machine to a Clarke Authorized Service
Location every 12 months for maintenance inspections.
Switches
WARNING: All electrical repairs must be
done by authorized personnel only. The
machine must be tested after electrical
repairs to make sure it is safe to operate.
Disconnect the electrical plug from the
electrical outlet before doing any
electrical repairs.
The start and stop switch has an interlock which pre-
vents the contacts from being closed. If any part of the
switch is not operating, replace the part. If any part of the
electrical system of the machine is not operating or is
damaged, replace the part. Make sure all connections
are tight. Return the machine to the Clarke Service
Branch or a Clarke Authorized Service Center for electri-
cal repairs or testing.
Maintenance Of The Motor
Induction type motors do not require motor brushes.
C2K-1600DS and C2K-2000DS require motor brushes.
If repairs to the gear unit or motor are needed, do not
disassemble the gears and motor. Return the machine
to the nearest Clarke Service Branch or Clarke Autho-
rized Service Center.
For safe operation, and longer life to your Clarke product,
use only Clarke parts.
NOTE: The grease (503802) for the gear box needs
to be changed every year.
1600DS, C2K-1800, C2K-2000 and C2K-2000DS re-
quire 8 oz. of grease. All other C2K series require
9 oz. of grease.
®
Clarke Operator's
The C2K-1600, C2K-
Manual- C2K Series 120V