Connecting The Water Line To The Refrigerator - Samsung SRF679SWLS User Manual

Connecting the water line to the
refrigerator
1. Remove the cap from the water line on the unit
and insert the compression nut of the water
line into the water line on the unit.
2. Connect the water line on the unit with the
water line in the kit .
3. Tighten the compression nut onto the
compression fitting.
There should be no gaps between (A, B & C)
4. Turn water on and check for any leakage.
Only connect the water line to a drinkable
water source.
If you have to repair or disassemble the
water line, cut off 6.5 mm of the plastic
tubing to make sure you get a snug, leak-
free connection.
Remove cap
Loosen a
Water Line from
unit
Water Line from
Kit
Before being used, the leakage in these
places should be examined.
CAUTION
• Samsung Warranty does not cover WATER
LINE INSTALLATION.
• It will be done at customer's charge unless the
retail price includes installation cost.
• Please contact Plumber or Authorized Installer
for the installation if needed.
• If Water leakage occurs due to improper
installation, Please contact installer.
DA68-03022B (EN)-04.indd 26
No gap
English - 26
14. 6. 23. 2:47