Battery Charging; Power Connection; Battery Talk Time; Battery Stand-By Time (For A New Battery) - Pantech TX-215C User Manual

BEFORE USING
H BATTERY CHARGING

POWER CONNECTION

 Plug the AC charger into a standard outlet.
 Plug the other end of the AC Charger into the bottom of your mobile
phone. The battery must be installed on to the mobile phone.
• When you charge the battery with the phone power off, you will see a
charging status screen. You cannot operate the phone until it is powered
on.
• The battery is not charged at the time of purchase.
• Fully charge the battery before use.
• It is more efficient to charge the battery with the handset powered off.
• The battery must be connected to the phone in order to charge it.
• Battery operating time gradually decreases over time.
• If the battery fails to perform normally, you may need to replace the bat-
tery.
14
BATTERY USAGE BATTERY USAGE

BATTERY TALK TIME

The operating time is subject to your handset usage and configuration.
Battery Capacity
STD 1000 mAh Up to 203 minutes
EXT 1700 mAh Up to 355 minutes

BATTERY STAND-BY TIME (FOR A NEW BATTERY)

The operating time is subject to your handset usage and configuration.
Battery Capacity
STD 1000 mAh 220 Hours
EXT 1700 mAh 400 Hours
These times are for a new battery. Talk and Standby time may decrease over
time.
BEFORE USING
DCS PCS
Up to 203 minutes
Up to 350 minutes
DCS PCS
190 Hours
350 Hours
15