Technical Data - McCulloch M46-125M Operator's Manual

Technical data

Engine
Engine manufacturer
Cylinder displacement, cm
Speed, rpm
Nominal engine output, kW (see note 1)
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Fuel tank capacity, litre
*Engine oil
Weight
Machine with empty tanks, kg
Noise emissions (see note 2)
Sound power level, measured dB (A)
Sound power level, guaranteed L
Sound levels (see note 3)
Sound pressure level at the operators ear, dB(A)
Vibration levels, a
hveq
2
Handle, m/s
Cutting system
Cutting height, mm
Cutting width, cm
Cutter
Note 1: The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ from this
value. Actual power output for the engine installed on the final machine will depend on the operating speed,
environmental conditions and other values.
Note 2: Noise emissions in the environment measured as sound power (L
EC.
Note 3: Noise pressure level according to EN 836. Reported data for noise pressure level has a typical statistical
dispersion (standard deviation) of 1.2 dB(A).
Note 4: Vibration level according to EN 836. Reported data for vibration level has a typical statistical dispersion (standard
2
deviation) of 0.2 m/s .
*Use engine oil of quality SF, SG, SH, SJ or higher. See the viscosity chart in the engine manufacturer's manual and
select the best viscosity based on the expected outside temperature.
TECHNICAL DATA
3
dB (A)
WA
(see note 4)
M46-125M
Briggs & Stratton
125
2900 ± 100
1,6
QC12YC
0,5
0.8
SAE 30/SAE 10W-30
17,2
92
93
79
2,9
30-65
46
Mulcher 46
) in conformity with EC directive 2000/14/
WA
English – 13