System Requirements; Steps Before The Installation Of Instanton - AOpen XC CubeAV User Manual

The "InterVideo InstantON" is a complete digital entertainment solution in XC CubeAV.
The system provides the most stable and compatible personal entertainment environment.
The InterVideo InstantON allows you to play MP3 files from your hard disk drive,
CD/VCD/DVD, or tune into a FM radio station without entering Windows system. Users may
use the audio buttons in the front panel or the remote controller to navigate through the
InterVideo InstantON window. If you follow our instructions you can experience the
powerful InterVideo InstantON.

1.1 System Requirements

Please set your Parallel ATA (or Serial ATA) hard disk on motherboard's IDE 1 (or
SATA 1) connector. And set them as "Master" mode before installing it.
Please set Optical drive as "Master" mode before installing it.
At least 350M unallocated disk area in the hard disk, the unallocated area in the
extend partition is not allowed. Please be informed that the InterVideo InstantON
MUST be installed prior to Windows operation system installation. Please follow the
necessary procedures of installation below when using a new hard drive:
Install"InstantON" first
Then do not remove the "InstantON" build partition during OS installing
Install "Drivers" and install "Home Theater" in finally

1.2 Steps Before the Installation of InstantON

Booting from CD
Before installation of the "InterVideo
InstantON", please insert the InterVideo
InstantON Installation CD into CD-ROM.
Not long after activating the power, you'll see
the following screen.
Please press [Delete] button to get into
BIOS. Then move the cursor to
[Advanced BIOS Features] and press
[Enter].
5