Brother RJ-3050 User Manual page 174

Changing Your Printer's Network Settings
c
Double-click the unconfigured device.
Note
If you don't use a DHCP/BOOTP/RARP server, the device will appear as [Unconfigured] in the BRAdmin
Light utility screen.
d
Choose [STATIC] for the [Boot Method]. Enter the [IP Address], [Subnet Mask] and [Gateway]
(if needed) of your print server.
e
Click [OK].
f
With a correctly programmed IP address, you will see the Brother print server in the device list.
15
165