Configuring Connection To The Internet; Configuring Wan Connection - D-Link DIR-300 Quick Installation Manual

DIR-300

Configuring Connection to the Internet

You should configure your WAN connection in accordance with data
!
provided by your Internet service provider (ISP). Make sure that you
have obtained all necessary information prior to configuring your
connection. Otherwise contact your ISP.

Configuring WAN Connection

1. Go to the Net / WAN page, select the WAN connection and click the
Delete button.
2. Click the Add button.
3. In the General settings section, select a needed value from the
Connection Type drop-down list.
4. From the Port drop-down list, select the Internet value.
5. Specify a name for your connection (any name for easier identification) in
the Name field.
Quick Installation Guide
16