Terminal Panel - Philips BDL3215E/00 Service Manual

3.2 Terminal Panel

1. AC IN Connector
Connect the supplied power cord to the wall outlet.
2. Audio OUT
Output the audio signal from AUDIO IN 1, 2, or 3 jack
to an external device (Stereo receiver, amplifier, etc.).
3. Audio IN 1, 2, 3
Input audio signal from an external equipment such as
computers, VCRs, or DVD players.
4. Video Input / Output Connector
Video IN Connector (BNC): To input composite video
signal.
Video OUT Connector (BNC): To output composite
video signal from VIDEO IN connector.
S-video IN connector (Mini DIN 4 pin): To input
S-VIDEO (Y/C separate signal).
5. External Control (D-Sub 9 pin)
Connect RS-232C input from external equipment such
as computers for the use of loop through function.
6. VGA OUT (mini D-Sub 15 pin)
Output the signal from VGA IN and RGB component.
7. HDMI IN
Connect equipment such as DVD players, HDTV
devices, or Set-Top-Box.
8. VGA IN (mini D-sub 15 pin)
To input analog RGB signals from a computer or from
other RGB equipment.
9. DVI-D Input
To input digital RGB signals from a computer or other
HDTV device with digital RGB output.
* This connector does not support analog input.
10. VGA (BNC) [R, G, B, H, V] or Component [Y,
Cb/Pb, Cr/Pr]
To input analog RGB or Y, Cb/Pb, Cr/Pr signals from
DVD players, HDTV decoders, set-top-box or game
consoles etc.
11. Kensington Lock
For security and theft prevention
13