Flash Mode - Argus DC-1088 User Manual

Flash Mode

Press the Mode button and select "
by pressing Up and Down to make the selection and press
the shutter button to confirm.
- AUTO mode: the flash fires whenever there is
insufficient brightness
- ON mode: the flash fires everytime a picture is taken.
- OFF mode: the flash does go off.
Note: When flash is charging, "
display. If the battery is low and the flash is on AUTO or ON
mode, the "
camera will not take picture.
or
" will blink on the LCD display and the
or
". Change the setting
" will blink on the LCD
10