Download
Share
Print this page
Keys Fitness KF-LP3 Owner's Manual
  1. Manuals
  2. Brands
  3. Keys Fitness Manuals
  4. Home Gym
  5. KF-LP3
  6. Owner's manual
Keys Fitness KF-LP3 Owner's Manual

Keys Fitness KF-LP3 Owner's Manual

Keys fitness leg press owner's manual
Hide thumbs

Advertisement

Quick Links

KF-LP3
L
P
eg
ress
Owner's Manual
215-00127
10/06 Rev A

Advertisement

loading

Related Manuals for Keys Fitness KF-LP3

Summary of Contents for Keys Fitness KF-LP3

  • Page 1 KF-LP3 ress Owner’s Manual 215-00127 10/06 Rev A...

  • Page 2: Table Of Contents

    Table Of Contents Before You Start Important Safety Information Assembly Parts List Exploded View Warranty Information...

  • Page 3: Before You Start

    This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Help line. We have trained service technicians on site to take care of you, our valued customer.

  • Page 4: Important Safety Information

    • This unit should only be used on a level surface and is intended for indoor use only. Keys Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning.

  • Page 5: Assembly

    Assembly Step 1 Slide one Pillow Block Bearing (17) onto each side of the Back Rocker (5). Use two Bolts (33), four Washers (44), and two Nylon Locknuts (41) to attach each Pillow Block Bearings (17) onto the Main Frame (1). Slide Short Spacer Tube (1) into the Front Rocker (4).
  • Page 6 Assembly Step 2 Attach Foot Plate (7) to the Connect Frame (6) using three Bolts (3), three Washers (44), and three Nylon Lock-nuts (41). Attach Right Handle () and Left Handle (3) to the Main Frame (1) using two Bolts (39), four Washers (43), and two Nylon Lock-nuts (4).
  • Page 7 Assembly Step 3 Attach Cross Base (8) to Main Frame (1) using Plate (14), two Bolts (39), four Washers (43), and two Nylon Lock-nuts (4). Slide Pulley Block (10) onto the Cross Base (8) and secure in place using two Bolts (40), four Washers (43), and two Nylon Lock-nuts (4).

  • Page 8: Assembly

    Assembly Step 4 Attach Seat Pad (4) to Main Frame (1) using two Bolts (38) and two Washers (43). Assemble Back Pad (3) to Back Pad Support (9) using two Bolts (35) and two Washers (43). Slide Back Pad Support assembly to Main Frame (1) and secure using Pop Pin (16). Figure 4...
  • Page 9 Run cable through Pulley Y location and then install Pulley Y onto Main Frame (1). Run cable through Pulley Z location and then install Pulley Z onto Main Frame (1). Last, thread cable end into the floating pulley of home gym unit. Figure 5 Note: Tighten all hardware securely.
  • Page 10 Weight Ratios...

  • Page 11: Parts List

    0-00647 0-00634 0-00700 0-0009 0-00091 0-0018 0-0017 0-00701 0-0070 0-00661 KF-lP3 Parts list Rev A description MAIN FRAME, KF-LP3 HANDLE, RIGHT KF-LP3 HANDLE, LEFT KF-LP3 ROCKER, FRONT KF-LP3 ROCKER, BACK KF-LP3 CONNECT FRAME, KF-LP3 FOOTPLATE KPS-LP BASE CROSS, KF-LP3 BACK PAD SUPPORT, KF-LP3...

  • Page 12: Exploded View

    Exploded View...

  • Page 13: Warranty Information

    Product from you. This Warranty becomes VALID ONLY if the product is pur- chased through a Keys Fitness authorized dealer unless otherwise authorized by Keys Fitness in writing and must be assembled / installed according to the instructions included with the Product.
  • Page 14 Keys Fitness Products, l.P. 4009 distribution drive, Suite 250 Garland, Texas 75041 Customer Service: 1-888-340-0482...