Advertisement
English
Our products are engineered to meet the highest
standards of quality, functionality and design.
We hope you thoroughly enjoy your new Braun
appliance.
Carefully read the use instructions before use.
Important
• Plug your hairdryer into an alternating current (~)
outlet only and be sure that your household
voltage corresponds to the voltage marked on the
hairdryer.
•
This appliance must never be used near
water (e.g. a filled wash basin, bathtub or
shower). Do not allow the appliance to
become wet.
• When using the hairdryer in a bathroom, always
unplug it after use. Even a switched-off hairdryer
presents a hazard if not unplugged.
• For additional protection, it is advisable to install a
residual current device (RCD) with a rated residual
operating current not exceeding 30 mA in the
electrical circuit of your bathroom. Ask your
installer for advice.
• Care should be taken not to block the inlet and
outlet grill when the hairdryer is switched on.
• If either grill becomes blocked, the hairdryer will
automatically cut out. After cooling for a few
minutes, it will switch back on automatically.
• Do not wrap the mains cord around the appliance.
Regularly check the mains cord for wear or
damage, particularly where it enters the product
and the plug. If you have any doubt about its
condition take the appliance to your nearest
Braun Service Centre for checking /repair. The
mains cord of the appliance may only be replaced
by an authorised Braun Service Centre.
Unqualified repair work can lead to extreme
hazards for the user.
• This appliance is not intended for use by children
or persons with reduced physical, sensory or
mental capabilities, unless they are given
supervision by a person responsible for their
safety. In general, we recommend that you keep
the appliance out of reach of children. Children
should be supervised to ensure that they do not
play with the appliance.
Description
1
Switch
2
Ion light
3
Cold shot button
4
Protection filter
5
Concentrator nozzle
6
Diffusor attachment (HD 530 only)
4
Switch settings 1
Two airflow and three temperature settings allow you
to personalize your hairdryer for a fast and efficient,
but also gentle drying.
Airflow
Temperature
II high
high
I
low
medium
O off
low
Ion technology
The ion technology produces a rich stream of satin
ions that hug every single hair.
The ions calm hair, reducing frizz and static to reveal
your hair's natural beauty and shine.
• When hairdryer is in operation, the ion light
shines to show that ions are generated.
• To obtain optimal results with the ionic function,
use the hairdryer without attachments.
• The effect of ions is less apparent when used in
high humidity environment.
Optimal styling with the ion technology
If drying with attachment, finish styling without
attachment to ensure maximum flow of ions and
a smoother, shinier, healthier looking result.
Cold shot 3
To fix a style with cold air, press the cold shot
button.
Protection filter 4
Regularly wipe the filter clean. For a thorough
cleaning, remove the filter and clean it under running
water.
Concentrator nozzle 5
For precise styling use the concentrator nozzle.
Diffusor attachment 6
Attaching the diffusor (a)
• Align the notches on the rim of the diffusor
attachment with the slots in the hair dryer.
• Push the attachment onto the hairdryer, then turn
clockwise until the bayonet lock clicks into place.
• To remove the diffusor, turn in the opposite
direction and pull.
Volume styling
• Short to mid-length hair:
To add volume and root lift, gently guide the
III
II
I
2
(model HD 530 only)
Advertisement
