D-Link DAP-1320 User Manual page 55

Section 5 - Troubleshooting
• Configure your Internet settings:
• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click
the button to restore the settings to their defaults.
• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button.
Make sure nothing is checked. Click OK.
• Go to the Advanced tab and click the Reset button to restore these settings to their defaults. Click OK three
times.
• Close your web browser (if open) and open it.
• Access the Web Management. Open your web browser and enter the IP address of your DAP-1320 in the address bar. This
should open the login page for your Web Management.
• If you still cannot access the configuration, unplug the device for 10 seconds and plug back in. Wait about 30 seconds and
try accessing the configuration. If you have multiple computers, try connecting using a different computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your DAP-1320 Unfortunately, this process will change all your settings back to
the factory default settings.
To reset the DAP-1320, locate the reset button (hole) on the bottom of the unit. With the device powered on, use a paperclip
to hold the button down for 10 seconds. Release the button and the device will reboot. Wait about 30 seconds to access the
DAP-1320. The default IP address is 192.168.0.50. When logging in, the username is admin and leave the password field empty.
D-Link DAP-1320 User Manual
Reset
51