Wi-Fi Settings - D-Link DAP-1320 User Manual

Section 3 - Configuration
From the Home page, click on the Settings drop-down menu at the top of the page and select Wi-Fi. Here you can configure
the Wi-Fi Network you would like your DAP-1320 to connect to. Use Site Survey to scan available Wi-Fi networks so you can
select the one you would like to extend.
Wireless Mode: This is set to Repeater mode and cannot be changed.
Wi-Fi Network Click Scan to use Site Survey to display available wireless
Name (SSID): networks within range of the DAP-1320. Select the one you
want to extend. You can also type in the name (SSID) of the
wireless network. The SSID is case-sensitive and must be
entered exactly the same as your router or access point.
Security: Select the security method that is being used by the wireless
network that you have selected: WEP, WPA/WPA2, or None.
Password: If you selected WEP or WPA/WPA2, you will be required to
enter the password or security key for the network you are
attempting to join.
Save: Click Save to save the settings and return to the home page.
D-Link DAP-1320 User Manual

Wi-Fi Settings

24