AT&T TL92271 Quick Start Manual page 18

Bluetooth setup
Replace an active device
If you already have two active devices on the device list and
you want to activate a different device, you must deactivate
one of the two active devices.
To replace an active device:
MENU
. Press
2. Press CID or
press SELECT.
CID
3. Press or
press SELECT.
4. Press CID or
activate, without a prefix D1: or D2:, then press OPTION.
5. Press CID or
SELECT. The handset displays Only 2 devices can be ready
for connection and then a list of devices for deactivation.
CID
6. Press or
deactivated, then press NEXT. The handset displays Cell
Phone A is deactivated and you hear a confirmation
tone. The screen then displays Connecting Cell Phone B
to the base...
. Depending on your cell phone settings, you may need to
press a key on your cell phone to confirm the connection.
When the new device is successfully activated and
connected, the handset displays Device connected. You
hear a confirmation tone.
Bluetooth connection from idle mode
When you have active devices that are not connected,
CONNECT appears on the idle handset. Press
to start connecting an active device. When there are two
active devices, the handset will prompt you to choose one
before connection.
on the handset when it is not in use.
DIR to highlight Bluetooth, then
DIR to highlight Device list, then
DIR to highlight the device you want to
DIR to highlight Connect, then press
DIR to highlight the device to be
CONNECT

BLUETOOTH
Add device
Device list
Download dir
BACK SELECT
1
DEVICE LIST
D1:Headset A
D2:Cel l Phone A
Cel l Phone B
BACK OPTION
1
DEACTIVATE
D1:Headset A
D2:Cel l Phone A
BACK NEXT
Connecting
Cel l Phone B
to the base...
1
DEVICE LIST
D1:Cel l Phone B
D2:Cel l Phone A
Headset A
BACK SELECT
1
1
HANDSET
--:-- --/--
CONNECT MENU