Pioneer VSX-D412-K Service Manual page 80

1
Display
1
A
B
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal assigned for the current
component:
AUTO
Lights when AUTO signal select is on.
DIGITAL
C
Lights when a digital audio signal is detected.
2 DIGITAL
Lights when a Dolby Digital signal is detected.
ANALOG
Lights when an analog signal is detected.
DTS
Lights when a source with DTS audio signals is detected.
2 DTS
When the Standard mode of the receiver is on, this lights to indicate
D
decoding of a DTS signal.
2 DIGITAL
3
When the Standard mode of the receiver is on, this lights to indicate
decoding of a Dolby Digital signal.
2 PRO LOGIC II
4
When the Standard mode of the receiver is on, this lights to indicate
Prologic II decoding.
5 ATT
Lights when INPUT ATT is used to attenuate (reduce) the level of
E
the input signal(can only be used with an analog signal).
6 DIRECT
Lights when source direct playback is in use. Direct playback
bypasses the tone controls and channel levels for the most accurate
reproduc-tion of source.
F
80
1
2
2 3 4
10 11
VSX-D412-K
2
3
5 6 7 8
12
7 MIDNIGHT
Lights during Midnight listening.
8 MONITOR
Lights when MONITOR is selected
9 Speaker indicator
Shows if the speaker system is on or not.
SP 3A means speakers are switched on. SP 3 means the
headphones are connected.
10 Character display
11 ADV. SURR (Advanced Surround)
Lights when one of the Advanced Surround listening modes
of the receiver is selected.
12 LOUDNESS
Lights when LOUDNESS has been selected.
13 TUNER indicators
STEREO:
Lights when a stereo FM broadcast is being received in
auto stereo mode.
MONO:
Lights when the mono mode is set using the
MPX button.
TUNED:
Lights when a broadcast is being received.
14 Master volume level
Shows the overall volume level. ---dB indicates the minimum level,
and −0 dB indicates the maximum level.
Depending on your level settings you make for each channel,
the maximum level can range between –10 dB and –0 dB.
3
4
9
13 14
4