Sylvania SDVD9805 User Manual page 6

2. Fitting the head rest mount to the headrest.
a. Fitting the head rest mount to the headrest.
b. Fitting the headrest mount to the seat.
The mount is designed for the separated headrest, some cars/vans don't
have separated headrest, if the seats look like as below, you must follow the
below installation to fit the mount.
Fit the straps around the headrest and
engage the 2 trident clips.
Ensure clips are securely fastened.
Pull the straps tight using the adjustment.
Tuck the loose ends into the strap tidy.
8
2. Fitting the headrest mount to the headrest.
Note:
Be sure to complete the installation then use SDVD9805 in the car.
For SDVD9805 installation is recommended that the DVD Player is on the
LEFT headrest, to ensure a neat cable run to the moniter, as shown below.
Let the belts crossing horizontally to the
top seat and engage the 2 trident clips.
Ensure clips are securely fastened.
Pull the straps tight using the adjustment.
Tuck the loose ends into the strap tidy.
9