Connecting To Unit A/B; In Car Installation Guide - Sylvania SDVD9805 User Manual

Connecting To Unit A/B

1.Connect unit A and unit B with AV cable.
2.Connect the unit to power by AC/DC adapter or cigarette light adapter
3.Turn on these two units, insert a disc into the disc compartment of the main unit A,
press the IN/OUT key on remote control B to change Unit B to AV IN mode, then you
can see the same image on both units.
Please refer to the illustration below.
Note:
Unit B has AV IN and AV OUT function. Unit A only has AV OUT function. So unit A can be
connected to unit B and TV, unit B can only be connected to TV.
Unit A
AV OUT
Unit B SD
AV IN/OUT
6

In Car Installation Guide

1. Fitting the headrest mount to the DVD Player.
Turn the headrest and player around so the backs are facing you.
Turn the headrest and player around so the front is facing you.
Note:
Both the headrest mounts are the same, there is no difference for DVD
Player or Monitor.
The DVD player will fit to the mount in this
position, as shown below.
Slide the vertical straps A and B through
the strap lock upon the back of the DVD
Player, or monitor, as shown.
Fold and secure the horizontal straps on
to the back of the mount until the velcro
attaches. Ensure the DVD Player or
monitor is mounted centrally.
Bring straps C1, C2, D1&D2 in front of the
DVD Player and attach to the veIcro as
shown.
7