Dynex 50" LED TV
AV (composite video) (good)
On your TV
AV
Audio cable
(composite
connectors
video)
cable
connector
AV
Analog
(composite
audio jacks
video) jack
1 Make sure that your TV's power cord is unplugged and all connected equipment is turned off.
2 Connect the incoming cable from the cable wall jack to the cable-in jack on the cable or satellite box.
3 Connect an AV cable (not provided) to the VIDEO/Y jack and AUDIO L and R jacks on the back of your TV and to the
composite video and audio out jacks on the cable or satellite box.
4 Plug your TV's power cord into a power outlet, turn on your TV, then turn on the cable or satellite box.
5 Press INPUT to open the INPUT SOURCE list.
6 Press
or
to highlight Comp/AV, then press ENTER.
Notes
• Cables are often color-coded to match color-coded jacks.
• The yellow video connector on the AV cable connects to the
green VIDEO/Y jack.
Cable or
satellite box
AV cable
(composite video)
Notes
• The VIDEO/Y, P
, and P
B
R
component device) share the AUDIO L and R jacks with the
VIDEO/Y jack (used to connect a composite device).
• When you connect the audio using the AUDIO L and R jacks,
the audio output is analog.
www.dynexproducts.com
Back of TV
video jacks (used to connect a
15
DX-50D510NA15