Figure 11-113. Installing Upper Hose Connection.
Figure 11-114. Installing Lower Radiator Hose
Clamp.
6. Check for adequate clearance between fan and
shroud. Adjust the lower radiator supports as
required, then torque the four mounting screws to
9.9 N·m (88 in. lb.). See Figures 11-115 and
11-116.
Figure 11-115. Fan Clearance Checking.
www.SmallEngineDiscount.com
Figure 11-116. Torquing Side Support Screws.
7. Hold the radiator assembly in position; then torque
the screws securing the two upper radiator
supports to 9.9 N·m (88 in. lb.). See Figure
11-117.
Figure 11-117. Torquing Upper Bracket Screws.
8. If the two flange nuts securing the upper brackets
to the top radiator mounts were loosened, torque
to 9.9 N·m (88 in. lb.). See Figure 11-118.
Not For Resale
Section 11
Reassembly
11
11.31