Using the Projector on a Network
Follow the instructions in these sections to set up your projector for use on a network.
Wired Network Monitoring and Control
Setting Up Projector Network E-Mail Alerts
Setting Up Network Monitoring
Controlling a Networked Projector Using a Web Browser
Wired Network Monitoring and Control
You can monitor, configure, and control your projector through a wired network. You can also send email
alerts from the projector when a problem occurs. To do this, you connect the projector to your network,
and then set up your projector and computer for network monitoring.
Connecting to a Wired Network
Selecting Wired Network Settings
Parent topic:
Connecting to a Wired Network
To connect the projector to a wired local area network (LAN), use a 100Base-TX or 10Base-T network
cable. To ensure proper data transmission, use a Category 5 shielded cable or better.
1. Connect one end of the network cable to your network hub, switch, or router.
2. Connect the other end of the cable to the projector's LAN port.
Parent topic:
Using the Projector on a Network
Wired Network Monitoring and Control
38