Attaching The Cover; Finishing Component Removal - Fujitsu LIFEBOOK E544 Operating Manual

Removing and installing components during servicing

Attaching the cover

2
1
► Place the cover in the correct location (1).
► Tighten the screw (2).

Finishing component removal

After you have removed or changed the system components as required, please
prepare your device for operation again as follows:
► Install the battery again, see "Installing a rechargeable battery", Page 34.
► Turn the notebook the right way up again and place it on a flat surface.
► Reconnect the cables that were previously disconnected.
68 Fujitsu