Table of Contents
Advertisement
Convenient functions
Basic Settings
Setting device name
It is also possible to change the name of
this unit on the network.
• Select from a preset list
Select the preset name, then press [OK].
• Create name
Enter the name.
Refer to "Entering text". (
Conversion Setting for DLNA
• On:
When playing back on DLNA (Client)
compatible equipment, this setting
reduces the chance of break-ups and
freezing of an image by lowering the
image quality.
• When this is set to "On", switching the channel or
starting playback will take longer.
Resolution Setting for DLNA
When "Conversion Setting for DLNA" is set
to "On", select the image quality.
Registration type for remote devices
• Automatic:
All connected devices on the same
network can access this unit.
• Manual:
Only registered devices can access this
unit.
Remote device list
• To register equipment manually
1 Select the device name or the MAC
Address for the device you want to
register, then press [OK].
2 Select "Yes", then press [OK].
• To deregister equipment
1 Select the registered equipment, then
press [OK].
2 Select "Yes", then press [OK].
• This function cannot be enabled when "Automatic"
is selected in "Registration type for remote
devices". (
above)
• The maximum number of equipment that can be
registered is 16.
86
SQT0139
Others
Standby Settings
Quick Start
• On:
It is possible to start quickly from standby
mode.
91)
• Off:
Power consumption in standby mode is
minimized. (
However, startup time from standby mode
will be longer.
• Timer Setting for Quick Start:
"Quick Start" is activated when the set time
comes.
• When "Home Network function" (
Recording function" (
for this function is fixed to "On".
• If "Off" or "Timer Setting for Quick Start" is selected, the
setting for "Unit's Display" is fixed to "Automatic". (
Automatic Standby
Set the time to turn the unit to standby mode
automatically.
When the unit is not operating, the unit will be
turned to standby mode once the set time has
passed.
• When "REWIND LIVE TV" is set to "On"
(
Automatic Standby after OTR
• On:
This unit is turned to standby mode when it
is not operated for approximately 5 minutes
after completing "Automatic Stop" or
"Recording Time" (
104)
85) is set to "On", the setting
81), "Off" cannot be selected.
28).
85) or "Remote
83)
Advertisement
Table of Contents
