Table of Contents
Advertisement
Auto Setup
You can restart the Auto Setup. (
PIN is required when you have locked channels.
(
right, Child Lock List)
Select "Yes", then press [OK].
• The timer recording programmes are cancelled.
• If you perform "Channel Sorting by Region" (
can sort the channel list best suited to your region after
Auto tuning is finished.
Channel Sorting by Region
If you want to sort the channel list best suited to
your region, follow the on-screen instructions to
select the region you live in.
Normally, you should select "Best signal quality
(All Regions)".
Manual Tuning
You can add new channels manually.
1 Press [3, 4] to select the frequency.
• Adjust the frequency by checking the signal
strength and signal quality displays.
2 Press [OK] to start scan.
• The set channel is displayed in the table.
Update Channel List
You can update the channel list to the latest one.
Signal Condition
You can check the quality and strength of signals.
Press [CH W X] to select the channel.
• The channels you can receive are affected by weather
conditions, seasons, time (day/night), region, length of the
cable that is connected to the aerial, etc.
• When the signal is too strong (red bar), reduce the signal
amplification at your aerial. (For details, consult your
dealer.)
New Channel Message
Set whether to obtain the information
automatically when a new DVB channel is added.
Child Lock
19)
• PIN is required to change. (
Child Lock List
You can restrict the viewing of channels.
You can lock each channel or AV input.
1 Select the channel or AV input to lock.
2 Press [OK].
below), you
Freeview Players
You can restrict the viewing of Digital teletext
(MHEG) unsuitable to children.
Preferred Multi Audio
Multi Audio
Select the language for multi broadcast.
If the selected language is not available, the
original language will be selected.
Audio Description
(When Audio Description is available in the
programme)
When "Automatic" is selected, Audio
Description will be set as default while
watching.
• When "Dolby D / Dolby D + / Dolby TrueHD", "MPEG"
or "HE-AAC" is set to "Bitstream", the Audio
Description may not work. Set them to "PCM"
(
Preferred Subtitles
Subtitles
Choose the subtitle language for broadcast. If
the selected language is not available, then
the original language will be selected.
is displayed.
• Press [OK] again to cancel.
• Green: Lock all channels.
• Yellow: Unlock all channels.
82, Digital Audio Output).
Convenient functions
24)
79
SQT0139
Advertisement
Table of Contents
