ASROCK Z87 Extreme6/ac User Manual page 38

Chassis Speaker Header
(4-pin SPEAKER1)
(see p.11 or p.12, No. 15)
Chassis and Power Fan
Connectors
(4-pin CHA_FAN1)
(see p.11 or p.12, No. 17)
(3-pin CHA_FAN2)
(see p.11 or p.12, No. 31)
(3-pin CHA_FAN3)
(see p.11 or p.12, No. 30)
(3-pin PWR_FAN1)
(see p.11 or p.12, No. 1)
CPU Fan Connectors
(4-pin CPU_FAN1)
(see p.11 or p.12, No. 3)
(3-pin CPU_FAN2)
(see p.11 or p.12, No. 4)
ATX Power Connector
(24-pin ATXPWR1)
(see p.11 or p.12, No. 7)
ATX 12V Power
Connector
(8-pin ATX12V1)
(see p.11 or p.12, No. 2)
DUMMY SPEAKER
1
+5V DUMMY
GND
+12V
FAN_SPEED
FAN_SPEED_CONTROL
FAN_SPEED_CONTROL
FAN_SPEED
+ 12V
GN D
12 24
1 13
8 5
4 1
Z87 Extreme6/ac / Z87 Extreme6
Please connect the chassis
speaker to this header.
Please connect fan cables
to the fan connectors and
match the black wire to
the ground pin.
his motherboard pro-
4
3
vides a 4-Pin CPU fan
2
1
(Quiet Fan) connector.
If you plan to connect a
3-Pin CPU fan, please
connect it to Pin 1-3.
his motherboard pro-
vides a 24-pin ATX power
connector. To use a 20-pin
ATX power supply, please
plug it along Pin 1 and Pin
13.
his motherboard pro-
vides an 8-pin ATX 12V
power connector. To use a
4-pin ATX power supply,
please plug it along Pin 1
and Pin 5.
31