Tm , 4-Way Crossfirex; Quad Crossfirex Tm Operation Guide; Installing Two Crossfirex; Tm -Ready Graphics Cards - ASROCK X99 WS-E/10G User Manual

2.10 CrossFireX
Quad CrossFireX
his motherboard supports CrossFireX
and Quad CrossFireX
Express x16 graphics cards. Currently CrossFireX
TM
CrossFireX and Quad CrossFireX
/ 8 64-bit / 8.1 / 8.1 64-bit OS.
1. You should only use identical CrossFireX
2. Make sure that your graphics card driver supports AMD CrossFireX
Download the drivers from the AMD's website: www.amd.com
3. Make sure that your power supply unit (PSU) can provide at least the minimum power
your system requires. It is recommended to use a AMD certiied PSU. Please refer to the
AMD's website for details.
4. If you pair a 12-pipe CrossFireX
ate as 12-pipe cards while in CrossFireX
5. Diferent CrossFireX
Please refer to AMD graphics card manuals for detailed installation guide.

2.10.1 Installing Two CrossFireX

CrossFire Bridge
48
TM
, 3-Way CrossFireX
TM
Operation Guide
TM
, 3-way CrossFireX
TM
that allows you to install up to three identical PCI
TM
are supported with Windows
TM
TM
Edition card with a 16-pipe card, both cards will oper-
TM
TM
cards may require diferent methods to enable CrossFireX
Step 1
Insert one graphics card into PCIE7 slot
and the other graphics card to PCIE3 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
Connect two graphics cards by installing
a CrossFire Bridge on the CrossFire Bridge
Interconnects on the top of the graphics
cards. (he CrossFire Bridge is provided
with the graphics card you purchase, not
bundled with this motherboard. Please
refer to your graphics card vendor for
details.)
TM
, 4-Way CrossFireX
TM
, 4-way CrossFireX
TM
, 3-way CrossFireX
®
7 / 7 64-bit / 8
-ready graphics cards that are AMD certiied.
TM
technology.
mode.
TM
-Ready Graphics Cards
TM
and
TM
TM
, 4-way
TM
.