ASROCK X99M Extreme4 User Manual
  1. Manuals
  2. Brands
  3. ASROCK Manuals
  4. Motherboard
  5. X99M Extreme4
  6. User manual
ASROCK X99M Extreme4 User Manual

ASROCK X99M Extreme4 User Manual

Asrock x99m extreme4 motherboard user manual
Hide thumbs Also See for X99M Extreme4:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Quick Links

Download this manual
Version 1.0
Published August 2014
Copyright©2014 ASRock INC. All rights reserved.

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identiication or explanation and to the owners' beneit, without intent to
infringe.
Disclaimer:
Speciications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or itness for a particular
purpose.
In no event shall ASRock, its directors, oicers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of proits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
his device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
he Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
"Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate"
ASRock Website: http://www.asrock.com

Advertisement

Table of Contents
loading

Related Manuals for ASROCK X99M Extreme4

Summary of Contents for ASROCK X99M Extreme4

  • Page 1: Copyright Notice

    (including damages for loss of proits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
  • Page 2 Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535; 7,003,467 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together is a registered trademark & DTS Connect, DTS Interactive, DTS Neo:PC are trademarks of DTS, Inc. Product includes sotware. ©...

  • Page 3: Motherboard Layout

    X99M Extreme4 Motherboard Layout CPU_FAN1 CPU_FAN2 ATX12V1 TPMS1 CLRC BTN1 USB 2.0 Debug T: USB3 B: USB4 2011-3 Socket USB 3.0 Top: T: USB1 RJ-45 B: USB2 USB 3.0 Top: T: USB3 RJ-45 B: USB4 BIOS_A_LED CMOS Battery 128Mb 128Mb...

  • Page 4: Table Of Contents

    No. Description 2 x 284-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1) ATX 12V Power Connector (ATX12V1) 2 x 284-pin DDR4 DIMM Slots (DDR4_D1, DDR4_C1) CPU Fan Connector (CPU_FAN1) CPU Fan Connector (CPU_FAN2) TPM Header (TPMS1) ATX Power Connector (ATXPWR1) USB 3.0 Header (USB3_5_6) Chassis Fan Connector (CHA_FAN2) SATA3 Connectors (S_SATA3_0_1) HDD Saver Connector (SATA_PWR_1)
  • Page 5 X99M Extreme4 I/O Panel No. Description No. Description USB 2.0 Ports (USB12) Optical SPDIF Out Port LAN RJ-45 Port (Intel® I218V)* USB 3.0 Ports (USB3_34) LAN RJ-45 Port (Qualcomm® Atheros® USB 3.0 Ports (USB3_12) AR8171)* Central / Bass (Orange) eSATA Connector*** Rear Speaker (Black) USB 2.0 Ports (USB34)
  • Page 6 * here are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications. ACT/LINK LED SPEED LED LAN Port Activity / Link LED Speed LED Status Description Status Description No Link 10Mbps connection Blinking Data Activity Orange...

  • Page 7: Chapter 1 Introduction

    ASRock’s website without further notice. If you require technical support related to this motherboard, please visit our website for speciic information about the model you are using. You may ind the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
  • Page 8 • 4 x DDR4 DIMM Slots • Supports DDR4 3000+(OC)*/2933+(OC)/2800(OC)/2400 (OC)/2133/1866/ 1600/1333/1066 non-ECC, un-bufered memory * Please refer to Memory Support List on ASRock's website for more information. (http://www.asrock.com/) • Supports non-ECC RDIMM (Registered DIMM) • Supports DDR4 ECC, un-bufered memory/RDIMM with Intel®...
  • Page 9 Rear Panel • 1 x Optical SPDIF Out Port • 1 x eSATA Connector • 4 x USB 2.0 Ports (Supports ESD Protection (ASRock Full Spike Protection)) • 4 x USB 3.0 Ports (Supports ESD Protection (ASRock Full Spike Protection)) • 2 x RJ-45 LAN Ports with LED (ACT/LINK LED and SPEED...

  • Page 10: Cpu Fan Connector (Cpu_Fan1)

    • 10 x SATA3 6.0 Gb/s Connectors, support RAID (RAID Storage 0, RAID 1, RAID 5, RAID 10 and Intel Rapid Storage 13), NCQ, AHCI, Hot Plug and ASRock HDD Saver Technology (S_SATA3_3 connector is shared with the eSATA port) (S_SATA3_2 connector is shared with Ultra M.2 Socket) * RAID is supported on SATA3_0 ~ SATA3_5 ports only.

  • Page 11: Hardware Monitor

    Due to limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® 32-bit operating systems. Windows® 64-bit operat- ing systems do not have such limitations. You can use ASRock XFast RAM to utilize the memory that Windows® cannot use.

  • Page 12: Chapter 2 Installation

    Chapter 2 Installation his is a Micro ATX form factor motherboard. Before you install the motherboard, study the coniguration of your chassis to ensure that the motherboard its into it. Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings.

  • Page 13: Installing The Cpu

    X99M Extreme4 2.1 Installing the CPU 1. Before you insert the 2011-3-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket.
  • Page 15 X99M Extreme4 Please save and replace the cover if the processor is removed. he cover must be placed if you wish to return the motherboard for ater service.
  • Page 16 2.2 Installing the CPU Fan and Heatsink...

  • Page 17: Installation Of Memory Modules (Dimm)

    X99M Extreme4 2.3 Installation of Memory Modules (DIMM) his motherboard provides four 284-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Quad Channel Memory Technology. 1. For quad channel coniguration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs.
  • Page 18 English...

  • Page 19: Expansion Slots (Pci Express Slots)

    X99M Extreme4 2.4 Expansion Slots (PCI Express Slots) here are 3 PCI Express slots on the motherboard. Before installing an expansion card, please make sure that the power supply is switched of or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.

  • Page 20: Jumpers Setup

    2.5 Jumpers Setup he illustration shows how jumpers are setup. When the jumper cap is placed on the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is “Open”. he illustration shows a 3-pin jumper whose pin1 and pin2 are “Short” when a jumper cap is placed on these 2 pins.

  • Page 21: Onboard Headers And Connectors

    X99M Extreme4 2.6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard. System Panel Header...
  • Page 22 Power LED Header Please connect the chassis (3-pin PLED1) power LED to this header PLED- PLED+ PLED+ (see p.1, No. 16) to indicate the system’s power status. Serial ATA3 Connectors hese ten SATA3 (S_SATA3_0_1: connectors support SATA see p.1, No. 10) data cables for internal (S_SATA3_2_3: storage devices with up...
  • Page 23 X99M Extreme4 Front Panel Audio Header his header is for PRESENCE# MIC_RET (9-pin HD_AUDIO1) connecting audio devices OUT_RET (see p.1, No. 26) to the front audio panel. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. High Deinition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly.
  • Page 24 CPU Fan Connectors his motherboard pro- (4-pin CPU_FAN1) vides a 4-Pin CPU fan (see p.1, No. 4) (Quiet Fan) connector. If you plan to connect a CPU_FAN_SPEED FAN_SPEED_CONTROL 3-Pin CPU fan, please (3-pin CPU_FAN2) connect it to Pin 1-3. (see p.1, No. 5) FAN_VOLTAGE FAN_SPEED ATX Power Connector...
  • Page 25 X99M Extreme4 RRXD1 Serial Port Header his COM1 header DDTR#1 DDSR#1 (9-pin COM1) CCTS#1 supports a serial port (see p.1, No. 23) module. RRI#1 RRTS#1 TTXD1 DDCD#1 TPM Header his connector supports Trusted (17-pin TPMS1) Platform Module (TPM) system, (see p.1, No. 6)

  • Page 26: Smart Switches

    2.7 Smart Switches he motherboard has two smart switches: one Clear CMOS Switch and one BIOS Selection Switch, allowing users to clear the CMOS values or boot from diferent BIOS. Clear CMOS Switch Clear CMOS Switch (CLRCBTN) allows users to quickly (see p.3, No.
  • Page 27 X99M Extreme4 2.8 Dr. Debug Dr. Debug is used to provide code information, which makes troubleshooting even easier. Please see the diagrams below for reading the Dr. Debug codes. Code Description Please check if the CPU is installed correctly and then clear CMOS.
  • Page 28 Problem related to USB devices. Please try removing all USB devices. Problem related to memory. Please re-install the CPU and memory then clear CMOS. If the problem still exists, please install only one memory module or try using other memory modules.
  • Page 29 X99M Extreme4 2.9 M.2_SSD (NGFF) Module Installation Guide he M.2, also known as the Next Generation Form Factor (NGFF), is a small size and versatile card edge connector that aims to replace mPCIe and mSATA. he Ultra M.2 Socket (M2_1) can accommodate either a M.2 SATA3 6.0 Gb/s module or a M.2 PCI Express module up to Gen3 x4 (32 Gb/s).
  • Page 30 Step 3 Move the standof based on the module type and length. he standof is placed at the nut location D by default. Skip Step 3 and 4 and go straight to Step 5 if you are going to use the default nut. Otherwise, release the standof by hand.
  • Page 31 X99M Extreme4 M.2_SSD (NGFF) Module Support List PCIe Interface SATA Interface Plextor PX-AG256M6e ADATA AXNS381E-128GM-B Plextor PX-AG512M6e ADATA AXNS381E-256GM-B SanDisk SD6PP4M-128G Crucial CT120M500SSD4/120G SanDisk SD6PP4M-256G Crucial CT240M500SSD4/240G Samsung XP941-512G (MZHPU512HCGL) Intel SSDSCKGW080A401/80G Kingston RBU-SNS8400S3/180GD For the latest updates of M.2_SSD (NFGG) module support list, please visit our website for...

  • Page 32: Hdd Saver Cable Installation Guide

    2.10 HDD Saver Cable Installation Guide The HDD Saver Connector on this motherboard allows you to switch on and off the connected HDDs via sotware when needed. his design secures more privacy, saves more energy, and extends the HDDs' lifespans. Please follow the steps below to install the HDD Saver Cable.
  • Page 33 X99M Extreme4 1 Einleitung Vielen Dank, dass Sie sich für das X99M Extreme4 von ASRock entschieden haben – ein zuverlässiges Motherboard, das konsequent unter der strengen Qualitätskontrolle von ASRock hergestellt wurde. Es liefert ausgezeichnete Leistung mit robustem Design, das ASRocks Streben nach Qualität und Beständigkeit erfüllt.

  • Page 34: Technische Daten

    • Unterstützt DDR4 3000+(OC)*/2933+(OC)/2800(OC)/2400 (OC)/ 2133/1866/1600/1333/1066 non-ECC, ungepuferter Speicher * Weitere Informationen inden Sie in der Speicherkompatibilitätsliste auf der ASRock-Webseite. (http:// www.asrock.com/) • Unterstützt ECC-lose RDIMM (Registered-DIMM) • Unterstützt DDR4 ECC, ungepuferter Speicher/RDIMM mit Intel® Xeon®-Prozessoren der E5-Serie im LGA 2011-3-Sockel • Systemspeicher, max.
  • Page 35 X99M Extreme4 • 7.1-Kanal-HD-Audio mit Inhaltsschutz (Realtek ALC1150- Audio Audiocodec) • Erstklassige Blu-ray-Audiounterstützung • Unterstützt Überspannungsschutz (ASRock Full Spike Protection) • Unterstützt Purity Sound™ 2 - Nichicon-Audiokappen der Fine Gold-Serie - 115-dB-SRV-DAC mit Diferentialverstärker - TI® NE5532 – erstklassiger Headset-Verstärker (unterstützt...
  • Page 36 • 10 x SATA-III-6,0-Gb/s-Anschlüsse, unterstützt RAID Speicher (RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid Storage Technology 13), NCQ, AHCI, Hot-Plugging und ASRock HDD-Saver-Technologie (S_SATA3_3-Anschluss wird mit eSATA-Port geteilt) (S_SATA3_2-Anschluss wird mit Ultra M.2 Socket geteilt) * RAID wird nur an den Ports SATA3_0 bis SATA3_5 unter- RAID wird nur an den Ports SATA3_0 bis SATA3_5 unter- stützt.
  • Page 37 Aufgrund von Beschränkungen kann die Größe des tatsächlich für die Systemnut- zung reservierten Speichers unter Windows®-Betriebssystemen mit 32 Bit weniger als 4 GB betragen. Windows®-Betriebssysteme mit 64 Bit haben keine derartigen Beschränkungen. Mit ASRock XFast RAM können Sie den Speicher einsetzen, den Windows® nicht nutzen kann.
  • Page 38 1.3 Jumpereinstellung Die Abbildung zeigt, wie die Jumper eingestellt werden. Wenn die Jumper- Kappe auf den Kontakten angebracht ist, ist der Jumper „kurzgeschlossen“. Wenn keine Jumper-Kappe auf den Kontakten angebracht ist, ist der Jumper „ofen“. Die Abbildung zeigt einen 3-poligen Jumper, dessen Kontakt 1 und Kontakt 2 „kurzgeschlossen“...

  • Page 39: Integrierte Stiftleisten Und Anschlüsse

    X99M Extreme4 1.4 Integrierte Stiftleisten und Anschlüsse Integrierte Stitleisten und Anschlüsse sind KEINE Jumper. Bringen Sie KEINE Jumper-Kappen an diesen Stitleisten und Anschlüssen an. Durch Anbringen von Jumper-Kappen an diesen Stitleisten und Anschlüssen können Sie das Motherboard dauerhat beschädigen. Systemblende-Stitleiste...
  • Page 40 Betrieb-LED-Stitleiste Bitte verbinden Sie (3-polig, PLED1) die Betrieb-LED des PLED- PLED+ (siehe S. 1, Nr. 16) Gehäuses zur Anzeige des PLED+ Systembetriebsstatus mit dieser Stitleiste. Serial-ATA-III- Diese zehn SATA-III- Anschlüsse Anschlüsse unterstützen (S_SATA3_0_1: SATA-Datenkabel für siehe S. 1, Nr. 10) interne Speichergeräte (S_SATA3_2_3: mit einer Datenübertr...
  • Page 41 X99M Extreme4 USB 3.0-Stitleisten Neben vier USB 3.0-Ports Vbus Vbus Vbus IntA_PB_SSRX- (19-polig, USB3_5_6) an der E/A-Blende IntA_PB_SSRX+ IntA_PA_SSRX- (siehe S. 1, Nr. 8) IntA_PA_SSRX+ beindet sich eine IntA_PB_SSTX- Stitleiste an diesem IntA_PA_SSTX- IntA_PB_SSTX+ IntA_PA_SSTX+ Motherboard. Jede USB IntA_PB_D- IntA_PA_D- IntA_PB_D+ 3.0-Stitleiste kann zwei...
  • Page 42 (3-polig, PWR_FAN1) (siehe S. 1, Nr. 28) CPU-Lüteranschlüsse Dieses Motherboard bietet (4-polig, CPU_FAN1) einen 4-poligen CPU- (siehe S. 1, Nr. 4) Lüteranschluss (lautloser Lüter). Falls Sie einen CPU_FAN_SPEED 3-poligen CPU-Lüter FAN_SPEED_CONTROL (3-polig, CPU_FAN2) anschließen möchten, (siehe S. 1, Nr. 5) verbinden Sie ihn bitte mit Kontakt 1 bis 3.
  • Page 43 X99M Extreme4 hunderbolt- Bitte verbinden Sie ein serielles Erweiterungskar- 5-poliges Kabel (GPIO- tenanschluss Kabel) mit diesem Anschluss, (5-polig, TBT1) wenn Sie eine hunderbolt™- (siehe S. 1, Nr. 24) Erweiterungskarte installieren. Serieller-Port-Stitleiste Diese Stitleiste RRXD1 DDTR#1 (9-polig, COM1) unterstützt ein Modul für...
  • Page 44 1.5 Intelligente Schalter Das Motherboard hat zwei intelligente Schalter: Ein CMOS-löschen-Schalter und ein BIOS-Auswahlschalter, wodurch Benutzer die CMOS-Werte löschen oder von einem anderen BIOS starten können. CMOS-löschen-Schalter Mit dem CMOS-löschen- (CLRCBTN) Schalter können Benutzer (siehe Seite 3, Nr. 14) die CMOS-Werte schnell löschen.
  • Page 45 Internet pour plus de détails sur le modèle que vous utilisez. La liste la plus récente des cartes VGA et des processeurs pris en charge est également disponible sur le site Internet de ASRock. Site Internet ASRock http://www.asrock.com.
  • Page 46 * Veuillez consulter la liste de prise en charge des mémoires sur le site Web d' A SRock pour de plus amples informations. (http:// www.asrock.com/) • Prend en charge RDIMM non-ECC (RDIMM enregistrée) • Prend en charge DDR4 ECC, la mémoire sans mise en tampon/RDIMM avec la série de processeurs Intel®...
  • Page 47 Wake On sur Internet (sur Qualcomm® Atheros® AR8171) • Prend en charge la fonction Wake-On-LAN • Protection contre les orages/décharges électrostatiques (Pro- tection complète contre les pics ASRock) • Prend en charge la fonction d’économie d’énergie Ethernet 802.3az • Prend en charge PXE • 1 x port souris/clavier PS/2...
  • Page 48 • 2 x embases USB 2.0 (4 ports USB 2.0 pris en charge) (Pro- tection contre les décharges électrostatiques (Protection complète contre les pics ASRock)) • 1 x embases USB 3.0 (2 ports USB 3.0 pris en charge) (Pro- tection contre les décharges électrostatiques (Protection complète contre les pics ASRock))
  • Page 49 • ErP/EuP Ready (alimentation ErP/EuP ready requise) tions * pour des informations détaillées de nos produits, veuillez visiter notre site : http://www.asrock.com Il est important de signaler que l'overcloking présente certains risques, incluant des modiications du BIOS, l’application d’une technologie d’overclocking déliée et l'utilisation d'outils d'overclocking développés par des tiers.

  • Page 50: Coniguration Des Cavaliers

    1.3 Coniguration des cavaliers (jumpers) L’illustration ci-dessous vous renseigne sur la coniguration des cavaliers (jumpers). Lorsque le capuchon du cavalier est installé sur les broches, le cavalier est « court- circuité ». Si le capuchon du cavalier n’est pas installé sur les broches, le cavalier est « ouvert ».
  • Page 51 X99M Extreme4 1.4 Embases et connecteurs de la carte mère Les embases et connecteurs situés sur la carte NE SONT PAS des cavaliers. Ne placez JAMAIS de capuchons de cavaliers sur ces embases ou connecteurs. Placer un capu- chon de cavalier sur ces embases ou connecteurs endommagera irrémédiablement votre carte mère.
  • Page 52 Embase LED Veuillez brancher le d’alimentation LED d’alimentation du PLED- PLED+ (PLED1 à 3 broches) châssis sur cette embase PLED+ (voir p.1, No. 16) pour indiquer l’état d’alimentation du sys- tème. Connecteurs Serial ATA3 Ces dix connecteurs (S_SATA3_0_1: SATA3 sont compatibles voir p.1, No.
  • Page 53 X99M Extreme4 Embase audio du panneau Cette embase sert au PRESENCE# frontal branchement des appareils MIC_RET (HD_AUDIO1 à 9 OUT_RET audio au panneau audio broches) frontal. (voir p.1, No. 26) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. L’audio haute déinition prend en charge la technologie Jack Sensing (détection de la iche), mais le panneau grillagé...
  • Page 54 Connecteurs du Cette carte mère est dotée ventilateur du processeur d’un connecteur pour (CPU_FAN1 à 4 broches) ventilateur de processeur (voir p.1, No. 4) (Quiet Fan) à 4 broches. Si vous envisagez de con- CPU_FAN_SPEED FAN_SPEED_CONTROL necter un ventilateur de processeur à...
  • Page 55 X99M Extreme4 Connecteur hunderbolt Veuillez connecter un câble de signal à 5 broches (câble GPIO) (TBT1 à 5 broches) à ce connecteur lorsque vous (voir p.1, No. 24) utilisez une carte d'extension hunderbolt™ (AIC). Embase pour port série Cette embase prend en...
  • Page 56 1.5 Boutons intelligents La carte mère est équipée de deux boutons intelligents : bouton d’efacement CMOS et bouton de sélecteur de BIOS qui permettent aux utilisateurs d’efacer les valeurs CMOS en toute simplicité ou de démarrer depuis un BIOS diférent. Bouton d’efacement Le bouton d’efacement CMOS CMOS permet aux...
  • Page 57 X99M Extreme4 1 Introduzione Congratulazioni per l’acquisto della scheda madre ASRock X99M Extreme4 , una scheda madre aidabile prodotta secondo i severissimi controlli di qualità ASRock. La scheda madre ofre eccellenti prestazioni con un design robusto che si adatta all'impegno di ASRock di ofrire sempre qualità e durata.
  • Page 58 • Supporto di memoria DDR4 3000+(OC)*/2933+(OC)/2800 (OC)/2400(OC)/2133/1866/1600/1333/1066 non-ECC, un- bufered * Per maggiori informazioni fare riferimento all'elenco dei supporti di memoria sul sito di ASRock. (http://www.asrock. com/) • Supporta RDIMM non ECC (DIMM registrato) • Supporta memoria/RDIMM DDR4 ECC, senza bufer con processori Intel®...
  • Page 59 • Supporta la tecnologia Qualcomm® Atheros®Security Wake On Internet (su Qualcomm®Atheros® AR8171) • Supporta Wake-On-LAN • Supporto la protezione da fulmini/scariche elettrostatiche (ESD) (protezione completa ASRock dai picchi di corrente) • Supporta Energy Eicient Ethernet 802.3az • Supporta PXE • 1 x porta mouse/tastiera PS/2 I/O pan- • 1 x porta uscita SPDIF ottico...
  • Page 60 • 10 x Connettori SATA3 6,0 Gb/s, supportano RAID (RAID 0, Archiviazi- RAID 1, RAID 5, RAID 10, Intel Rapid Storage Technology 13), NCQ, AHCI, Hot Plug e tecnologia ASRock HDD Saver (il connettore S_SATA3_3 è condiviso con la porta eSATA) (il connettore S_SATA3_2 è condiviso con la Ultra M.2 Socket) * RAID è...
  • Page 61 4 GB per riservare l'uso del sistema ai sistemi operativi di Windows® a 32 bit. I sistemi operativi Windows® a 64 bit non possiedono tali limitazioni. È possibile utilizzare la RAM XFast di ASRock per utilizzare la memoria che Windows® non può utilizzare.
  • Page 62 1.3 Impostazione jumper L'illustrazione mostra in che modo vengono impostati i jumper. Quando il cappuccio del jumper è posizionato sui pin, il jumper è "cortocircuitato". Se sui pin non è posizionato alcun cappuccio del jumper, il jumper è "aperto". L'illustrazione mostra un jumper a 3 pin i cui pin1 e pin2 sono "cortocircuitati"...
  • Page 63 X99M Extreme4 1.4 Header e connettori sulla scheda Gli header e i connettori sulla scheda NON sono jumper. NON posizionare cappucci del jumper su questi header e connettori. Il posizionamento di cappucci del jumper su header e connettori provocherà danni permanenti alla scheda madre.
  • Page 64 Header LED di Collegare il LED di alimentazione alimentazione chassis a PLED- PLED+ (PLED1 a 3 pin) questo header per indicare PLED+ (vedere pag. 1, n. 16) lo stato di alimentazione del sistema. Connettori Serial ATA3 Questi dieci connettori (S_SATA3_0_1: SATA3 supportano cavi vedere pag.
  • Page 65 X99M Extreme4 Header audio pannello Questo header serve a PRESENCE# anteriore collegare i dispositivi MIC_RET OUT_RET (AUDIO1_HD a 9 pin) audio al pannello audio (vedere pag. 1, n. 26) anteriore. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. L'audio ad alta deinizione supporta le funzioni Jack sensing, ma il ilo del pan- nello sullo chassis deve supportare HDA per funzionare correttamente.
  • Page 66 Connettori della ventola Questa scheda madre è della CPU dotata di un connettore (CPU_FAN1 a 4 pin) per la ventola della CPU (vedere pag. 1, n. 4) (Ventola silenziosa) a 4 CPU_FAN_SPEED pin. Se si decide di col- FAN_SPEED_CONTROL legare una ventola della (CPU_FAN2 a 3 pin) CPU a 3 pin, collegarla al (vedere pag.
  • Page 67 X99M Extreme4 Header porta seriale Questo header supporta RRXD1 DDTR#1 (COM1 a 9 pin) un modulo di porta DDSR#1 CCTS#1 (vedere pag. 1, n. 23) seriale. RRI#1 RRTS#1 TTXD1 DDCD#1 Header TPM Questo connettore supporta il (TPMS1 a 17 pin) sistema Trusted Platform Module (vedere pag.
  • Page 68 1.5 Interruttori intuitivi La scheda madre è dotata di uno interruttori intuitivi: Interruttore Clear CMOS ed un interruttore di selezione BIOS che consentono di cancellare i valori CMOS oppure eseguire l’avvio su un BIOS diverso. Interruttore Clear CMOS L’interruttore Clear (CLRCBTN) CMOS consente di (vedere pag.

  • Page 69: Contenido Del Paquete

    X99M Extreme4 1 Introducción Gracias por comprar la placa base ASRock X99M Extreme4 , una placa base iable fabricada según el rigurosísimo control de calidad de ASRock. Ofrece un rendimiento excelente con un diseño resistente de acuerdo con el compromiso de calidad y resistencia de ASRock.
  • Page 70 • Compatible con memoria no-ECC, sin búfer DDR4 3000+(OC)*/2933+(OC)/2800(OC)/2400(OC)/ 2133/1866/1600/1333/1066 * Para obtener más información, consulte la lista de memorias compatibles en el sitio web de ASRock. (http://www.asrock. com/) • Admite RDIMM no ECC (DIMM registrado) • Admite ECC DDR4, memoria sin búfer/RDIMM con procesadores Intel®...
  • Page 71 I/O • 1 conector eSATA • 4 puertos USB 2.0 (compatible con protección contra electricidad estática (protección ASRock Full Spike)) • 4 puertos USB 3.0 (compatible con protección contra electricidad estática (protección ASRock Full Spike)) • 2 puertos LAN RJ-45 con LED (ACT/LINK LED y SPEED LED) • 1 interruptor de borrado CMOS...
  • Page 72 (RAID 0, RAID 1, RAID 5, RAID 10, Intel Rapid Storage namiento Technology 13), NCQ, AHCI y conexión en caliente y tec- nología de ahorro ASRock HDD (el conector S_SATA3_3 se comparte con el puerto eSATA) (el conector S_SATA3_2 se comparte con el puerto Ultra M.2...
  • Page 73 Windows® de 32 bits. Los sitemas operativos Windows® de 64 bits no tienen estas limitaciones. Podrá utilizar XFast RAM de ASRock para usar la memoria que Windows® no puede utilizar.
  • Page 74 1.3 Instalación de los puentes La instalación muestra cómo deben instalarse los puentes. Cuando la tapa de puente se coloca en los pines, el puente queda “Corto”. Si no coloca la tapa de puente en los pines, el puente queda “Abierto”. La ilustración muestra un puente de 3 pines cuyo pin 1 y pin 2 son “Cortos”...
  • Page 75 X99M Extreme4 1.4 Conectores y cabezales incorporados Los cabezales y conectores incorporados NO son puentes. NO coloque tapas de pu- ente sobre estos cabezales y conectores. Si coloca tapas de puente sobre los cabezales y conectores dañará de forma permanente la placa base.
  • Page 76 Cabezal de indicador LED Conecte el indicador LED de alimentación de alimentación del chasis PLED- PLED+ (PLED1 de 3 pines) a este cabezal para indicar PLED+ (consulte la pág.1, N.º 16) el estado de alimentación del sistema. Conectores Serie ATA3 Estos diez conectores (S_SATA3_0_1: SATA3 son compatibles...
  • Page 77 X99M Extreme4 Cabezal de audio del Este cabezal se utiliza PRESENCE# panel frontal para conectar dispositivos MIC_RET OUT_RET (HD_AUDIO1 de 9 pines) de audio al panel de audio (consulte la pág.1, N.º 26) frontal. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. El Audio de Alta Deinición (HDA, en inglés) es compatible con el método de sen- sor de conectores, sin embargo, el cable del panel del chasis deberá...
  • Page 78 Conectores del ventilador Esta placa base contiene de la CPU un conector de ventilador (CPU_FAN1 de 4 pines) (ventilador silencioso) de (consulte la pág.1, N.º 4) CPU de 4 pines. Si tiene CPU_FAN_SPEED pensando conectar un FAN_SPEED_CONTROL ventilador de CPU de 3 (CPU_FAN2 de 3 pines) pines, conéctelo al Pin 1-3.
  • Page 79 X99M Extreme4 Cabezal de puerto serie Este cabezal admite un RRXD1 DDTR#1 (COM1 de 9 pines) módulo de puerto serie. DDSR#1 CCTS#1 (consulte la pág.1, N.º 23) RRI#1 RRTS#1 TTXD1 DDCD#1 Cabezal TPM Este conector es compatible con (TPMS1 de 17 pines) el sistema Módulo de Plataforma...
  • Page 80 1.5 Interruptores inteligentes La placa base contiene dos interruptores inteligentes: Interruptor de borrado de CMOS y un interruptor de selección BIOS, que permiten a los usuarios borrar los valores de CMOS, o arrancar desde un BIOS diferente. Interruptor de borrado de El interruptor de borrado CMOS de CMOS permite a...
  • Page 81 ASRock также можно найти самый последний перечень поддерживаемых VGA- карт и ЦП. Веб-сайт ASRock http://www.asrock.com. 1.1 Комплект поставки • Системная плата ASRock X99M Extreme4 (форм-фактор Micro ATX) • Краткое руководство по установке ASRock X99M Extreme4 • Компакт-диск с ПО для платы ASRock X99M Extreme4 • 1 х...
  • Page 82 (OC)/2800(OC)/2400(OC)/ 2133/1866/ 1600/1333/1066 Non-ECC Unbufered * Дополнительная информация представлена в Списке совместимой памяти (Memory Support List ) на веб-сайте ASRock. (http://www.asrock.com/) • Поддержка RDIMM без ЕСС (Регистровая память DIMM) • Поддержка DDR4 ECC, небуферизованной памяти/ RDIMM с процессорами Intel® Xeon® серии E5 в LGA 2011-3 Socket • Максимальный...
  • Page 83 • 7.1-канальный звук высокой четкости HD Audio с Аудио защитой данных (аудиокодек Realtek ALC1150) • Поддержка Premium Blu-ray Audio • Защита от перенапряжения (ASRock Full Spike Protection) • Поддержка Purity Sound™ 2 - Конденсаторы для аудиосистем серии Nichicon Fine Gold - 115 дБ...
  • Page 84 6,0 ГБ/с, технологии RAID (RAID 0, RAID 1, RAID устройства 5, RAID 10, Intel Rapid Storage Technology 13), NCQ, AHCI, "горячего" подключения и ASRock HDD Saver (разъем S_SATA3_3 используется с портом eSATA) (разъем S_SATA3_2 используется с портом Ultra M.2 Socket) * Поддержка...
  • Page 85 ответственность за возможный ущерб, вызванный разгоном процессора. В связи с ограничением при работе под 32-разрядной ОС Windows® фактический объем памяти может быть меньше 4 Гбайт. Для 64-разрядных ОС Windows® таких ограничений нет. Для использования той памяти, которую ОС Windows® не может использовать, используйте ASRock XFast RAM.
  • Page 86 1.3 Установка перемычек Установка перемычек показана на рисунке. При установке колпачковой перемычки на контакты перемычка «замкнута». Если колпачковая перемычка на контакты не установлена, перемычка «разомкнута». На рисунке показана 3-контактная перемычка с замкнутыми контактами 1 и 2 при установке на них колпачковой...
  • Page 87 X99M Extreme4 1.4 Колодки и разъемы, расположенные на материнской плате Расположенные на материнской плате колодки и разъемы перемычками НЕ являются. НЕ устанавливайте на эти колодки и разъемы колпачковые перемычки. Установка колпачковых перемычек на эти колодки и разъемы может вызвать неустранимое повреждение материнской платы.
  • Page 88 Колодка светодиодного Подключите индикатора питания светодиодный индикатор PLED- (3-контактная, PLED1) PLED+ питания корпуса к PLED+ (См. стр. 1, № 16) этой колодке, чтобы обеспечить индикацию состояния питания системы. Разъемы Serial ATA3 Эти десять (S_SATA3_0_1: разъемов SATA3 См. стр. 1, № 10) предназначены...
  • Page 89 X99M Extreme4 Аудиоколодка передней Эта колодка PRESENCE# панели предназначена MIC_RET (9-контактная, HD_ OUT_RET для подключения AUDIO1) аудиоустройств к (См. стр. 1, № 26) передней аудиопанели. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. Аудиосистема высокого разрешения поддерживает функцию распознавания разъема, но для е правильной работы необходимо, чтобы провод панели...
  • Page 90 Разъемы вентиляторов Эта материнская ЦП плата снабжена (4-контактный, CPU_ 4-контактным разъемом FAN1) для малошумящего (См. стр. 1, № 4) вентилятора ЦП. Если вы CPU_FAN_SPEED FAN_SPEED_CONTROL собираетесь подключить (3-контактный, CPU_ 3-контактный FAN2) вентилятор охлаждения (См. стр. 1, № 5) процессора, подключайте FAN_VOLTAGE его...
  • Page 91 X99M Extreme4 Разъем hunderbolt AIC При установке расширительной (5-контактный TBT1) платы (AIC-карты) (См. стр. 1, № 24) hunderbolt™ подключите к данному разъему 5-контактный сигнальный кабель (кабель интерфейса GPIO). Колодка Колодка поддерживает RRXD1 DDTR#1 последовательного порта подключение модуля DDSR#1 CCTS#1 (9-контактная, COM1) последовательного...
  • Page 92 1.5 Электронные кнопки На системной плате размещены два электронных переключателя: кнопка очистки КМОП и селекторный переключатель BIOS, очищать параметры КМОП или загружаться с другой BIOS. Кнопка сброса настроек Кнопка сброса настроек CMOS CMOS предназначена (CLRCBTN) для быстрого обнуления (См. стр. 3, № 14) значений...
  • Page 93 X99M Extreme4 1 Introdução Obrigado por adquirir a placa mãe ASRock X99M Extreme4 , uma coniável placa mãe ASRock produzida sob rigoroso controle de qualidade consistente. Esta placa principal oferece um excelente desempenho com um design robusto em conformidade com o compromisso da ASRock em fabricar produtos de qualidade e resistentes.
  • Page 94 (OC)/2400(OC)/ 2133/1866/1600/1333/1066, não ECC, sem memória intermediária * Por favor, consulte a Lista de Suporte de Memória no site da ASRock para obter mais informação. (http://www.asrock.com/) • Suporta RDIMM não ECC (DIMM registrada) • Suporta DDR4 ECC, memória não armazenamento/RDIMM com processadores Intel ®...
  • Page 95 X99M Extreme4 • Áudio HD de 7.1 canais com proteção de conteúdo (Codec de Áudio áudio Realtek ALC1150) • Suporte áudio Blu-ray superior • Suporta proteção contra sobretensão (Proteção Total Contra Picos ASRock) • Suporta Purity Sound™ 2 - Capacitor de Áudio Série Ouro Fino Nichicon - 115dB SNR DAC com ampliicador diferencial - Ampliicador de Fone de Ouvido TI®NE5532 Premium...
  • Page 96 • 1 x Conector hunderbolt AIC • 2 x Plataformas USB 2.0 (Suporta 4 portas USB 2.0) (Suporta Proteção ESD (Proteção Total Contra Picos ASRock)) • 1 x Plataformas USB 3.0 (Suporta 2 portas USB 3.0) (Suporta Proteção ESD (Proteção Total Contra Picos ASRock)) • 1 x Dr.
  • Page 97 ErP/EuP) * Para obter informações detalhadas sobre o produto, por favor, visite o nosso site: http://www.asrock.com Por favor, observe que existe um certo risco envolvendo overclocking, incluindo o ajuste das deinições na BIOS, a aplicação de tecnologia Untied Overclocking ou a utilização de ferramentas de overclocking de terceiros.
  • Page 98 1.3 Coniguração dos jumpers A imagem abaixo mostra como os jumpers são conigurados. Quando a tampa do jumper é colocada nos pinos, o jumper é "Curto". Se não for colocada uma tampa de jumper nos pinos, o jumper é "Aberto". A imagem mostra um jumper de 3 pinos cujos pino1 e pino2 estão "Curtos"...
  • Page 99 X99M Extreme4 1.4 Suportes e conectores onboard Os conectores e suportes onboard NÃO são jumpers. NÃO coloque tampas de jumpers sobre estes terminais e conectores. Colocar tampas de jumpers sobre os terminais e conec- tores irá causar danos permanentes à placa-mãe.
  • Page 100 Suporte LED de Por favor, conecte o LED alimentação de alimentação do chassi PLED- PLED+ (PLED1 de 3 pinos) neste suporte para indicar PLED+ (ver p.1, N.º 16) o estado de alimentação do sistema. Conectores série ATA3 Estes dez conectores (S_SATA3_0_1: SATA3 suportam ver p.1, N.º...
  • Page 101 X99M Extreme4 Suporte de áudio do painel Este suporte destina-se à PRESENCE# frontal conexão dos dispositivos MIC_RET OUT_RET (HD_AUDIO1 de 9 pinos) de áudio no painel de (ver p.1, N.º 26) áudio frontal. OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. O Áudio de alta deinição suporta Sensor de Adaptador, mas o io do painel no chassi deverá...
  • Page 102 Conectores do ventilador Esta placa mãe inclui um da CPU conector de ventilador (CPU_FAN1 de 4 pinos) da CPU (Ventilador (ver p.1, N.º 4) silencioso) de 4 pinos. Se CPU_FAN_SPEED você pretende conectar um FAN_SPEED_CONTROL (CPU_FAN2 de 3 pinos) ventilador da CPU de 3 (ver p.1, N.º...
  • Page 103 X99M Extreme4 Suporte da porta serial Este suporte recebe um RRXD1 DDTR#1 (COM1 de 9 pinos) módulo da porta serial. DDSR#1 CCTS#1 (ver p.1, N.º 23) RRI#1 RRTS#1 TTXD1 DDCD#1 Suporte TPM Este conector suporta um sistema (TPMS1 de 17 pinos) com Módulo de Plataforma Con-...
  • Page 104 1.5 Interruptores inteligentes A placa-mãe tem dois chaves inteligentes: Chave para Limpar CMOS e uma Chave de Seleção da BIOS, que permite aos usuários limpar os valores de CMOS ou inicializar de BIOS diferentes. Interruptor para apagar o O interruptor para apagar CMOS o CMOS permite aos (CLRCBTN)
  • Page 105 ASRock'ın web sitesinde yer alacaktır.. Bu anakart ile ilgili olarak teknik destek almak istiyorsanız, lütfen kullandığınız model hakkında özel bilgiler için web sitemizi ziyaret edin. En güncel VGA kartları ve CPU destek listelerini de ASRock'ın web sitesinden bulabilirsiniz. ASRock web sitesi http://www.asrock.com.
  • Page 106 • ECC olmayan, ara belleğe alınmamış DDR4 3000+(OC)*/2933+(OC)/ 2800(OC)/2400(OC)/ 2133/1866/1600/1333/1066 belleği destekler * Ayrıntılı bilgi için ASRock'ın web sitesindeki Bellek Desteği Listesine bakın. (http://www.asrock.com/) • ECC-dışı RDIMM Desteği (Kayıtlı DIMM) • DDR4 ECC, LGA 2011-3 Sokette Intel® Xeon® iºlemci E5 serisi ile birlikte ara belleksiz bellek /RDIMM desteği...
  • Page 107 • İçerik Koruma Özelliği ile 7.1 CH HD Ses (Realtek ALC1150 Ses Codec Bileşeni) • Üstün Blu-ray Ses desteği • Dalgalanma Koruması Destekler (ASRock Tam Ani Gerilim Koruması) • Purity Sound™ 2 destekler - Nichicon Fine Gold Serisi Ses Kapakları...
  • Page 108 • 10 x SATA3 6,0 Gb/s Bağlayıcısı, RAID (RAID 0, RAID 1, Depolama RAID 5, RAID 10, Intel Rapid Storage Technology 13), NCQ, AHCI, Tak Çıkar ve ASRock Sabit Disk Kaydedici Teknolojisi destekler (S_SATA3_3 bağlayıcısı eSATA bağlantı noktasıyla paylaşılır) (S_SATA3_2 bağlayıcısı Ultra M.2 Socket bağlantı noktasıyla paylaşılır)
  • Page 109 • ErP/EuP için hazır (ErP/EuP için hazır güç beslemesi gerek- lidir) * Detaylı ürün bilgisi için, lütfen web sitemizi ziyaret edin: http://www.asrock.com Lütfen, BIOS ayarlarını düzenleme, Bağımsız Hız Aşırtma Teknolojinin uygulanması ya da üçüncü kişilerin hız aşırtma araçlarının kullanılması da dahil olmak üzere tüm hız aşırtma işlemlerinin belirli bir risk taşıdığını...
  • Page 110 1.3 Bağlantı Teli Kurulumu Çizim, bağlantı tellerinin kurulumunu göstermektedir. Tel kapağı, pimlerin üzerine yerleştirildiğinde, tel "Kısa" olur. Pimlerin üzerinde tel kapağı bulunmadığında, tel "Kısa" olur. Çizim, pin1 ve pin2 alanları "Kısa" olan ve bu iki pim üzerinde bir bağlantı teli kapağı bulunan 3-pin bağlantı telini göstermektedir. CMOS'u Temizle Bağlantı...
  • Page 111 X99M Extreme4 1.4 Ekli Bağlantılar ve Bağlayıcılar Ekli bağlantılar ve bağlayıcılar bağlantı teli değildir. Bağlantı teli kapaklarını bu bağlantı ve bağlayıcılar üzerine yerleştirmeyin. Bağlantı teli kapaklarının bağlantılar ile bağlayıcılar üzerine yerleştirilmesi, anakarta kalıcı hasar verebilir. Sistem Paneli Bağlantısı Güç anahtarını bağlayın,...
  • Page 112 Güç LED Bağlantısı Sistemin güç durumunun (3-pin PLED1) belirtilmesi için lütfen PLED- PLED+ PLED+ (bkz. sf.1, No. 16) güç LED'ini bu bağlantıya takın. Seri ATA3 Bağlayıcıları Bu on SATA3 bağlayıcısı, (S_SATA3_0_1: veri aktarım hızı 6,0 Gb/ bkz. sf.1, No. 10) sn'ye kadar olan dahili (S_SATA3_2_3: depolama aygıtları...
  • Page 113 X99M Extreme4 USB 3.0 Bağlantıları Bu anakart üzerinde, I/O Vbus Vbus Vbus IntA_PB_SSRX- (19-pin USB3_5_6) paneli üzerindeki dört USB IntA_PB_SSRX+ IntA_PA_SSRX- IntA_PA_SSRX+ (bkz. sf.1, No. 8) 3.0 bağlantı noktasının IntA_PB_SSTX- IntA_PA_SSTX- IntA_PB_SSTX+ yanı sıra, bir adet bağlantı IntA_PA_SSTX+ IntA_PB_D- bulunmaktadır. Her...
  • Page 114 Kasa ve Güç Fanı Lütfen fan kablolarını FAN_SPEED_CONTROL FAN_SPEED Bağlayıcıları +12V fan bağlayıcılarına takın (4-pin CHA_FAN1) ve siyah teli topraklama (bkz sf.1, No. 20) pinine bağlayın. CHA_ FAN fan hızı UEFI veya (3-pin CHA_FAN2) A-Tuning yoluyla kontrol FAN_VOLTAGE FAN_SPEED (bkz sf.1, No. 9) edilebilir.
  • Page 115 X99M Extreme4 PCIe Güç Bağlayıcısı Üçten fazla graik kartı (4 pimli PCIE_PWR1) takıldığında, lütfen bu bağlayıcıya (bkz. sf.1, No. 25) bir 4 pim molex güç kablosu bağlayın. +12V DETECT Sabit Disk Kaydedici Sabit diskin güç durumunu Bağlayıcısı yönetmek için lütfen bu (4 pimli SATA_PWR_1) bağlayıcıya Sabit Disk Kaydedici...
  • Page 116 1.5 Akıllı Anahtar Anakartta iki adet akıllı düğme bulunur: CMOS Temizleme Düğmesi ve bir BIOS Seçim Anahtarı kullanıcıların CMOS değerlerini temizlemelerini ya da farklı BIOS'tan yüklemelerini sağlar. CMOS Temizleme CMOS Temizleme Düğmesi Düğmesi kullanıcıların (CLRCBTN) CMOS değerlerini hızlı (bkz. sf.3, No. 14) bir şekilde temizlemelerini sağlar.
  • Page 117 X99M Extreme4 1 개요 ASRock X99M Extreme4 마더보드를 구입해 주셔서 감사합니다 . 이 마더보드는 ASRock 의 일관되고 엄격한 품질관리 하에 생산되어 신뢰성이 우수합니다 . 품 질과 내구성에 대한 ASRock 의 기준에 부합하는 우수한 성능과 견고한 설계를 제공합니다 . 마더보드 규격과 BIOS 소프트웨어를 업데이트할 수도 있기 때문에 , 이 설명서의...
  • Page 118 • DDR4 3000+(OC)*/2933+(OC)/2800(OC)/2400 (OC)/2133/1866/ 1600/1333/1066 비 -ECC, 비버퍼링 메모 리 지원 * 추가 정보를 원하시면 ASRock 웹사이트에 있는 메모리 지 원 목록을 참조하십시오 . (http://www.asrock.com/) • 비 -ECC RDIMM( 등록 DIMM) 지원 • LGA 2011-3 소켓에서 버퍼링되지 않은 메모리 DDR4 ECC/Intel®...
  • Page 119 • 광학 SPDIF 출력 포트 1 개 • eSATA 커넥터 1 개 • USB 2.0 포트 4 개 (ESD 보호 지원 (ASRock 풀 스파이크 보 호 )) • USB 3.0 포트 4 개 (ESD 보호 지원 (ASRock 풀 스파이크 보...
  • Page 120 • SATA3 6.0 Gb/s 커넥터 10 개가 RAID (RAID 0, RAID 1, 저장 장치 RAID 5, RAID 10, Intel 빠른 저장 기술 13), NCQ, AHCI, 핫 플러그 및 ASRock HDD 세이버 기술을 지원 (S_SATA3_3 커넥터가 eSATA 포트와 공유됨 ) (S_SATA3_2 커넥터가 Ultra M.2 Socket 포트와 공유됨 ) * RAID 는...
  • Page 121 제한 때문에 실제 메모리 크기는 Windows® 32 비트 운영체제 하의 시스템 사용 을 위한 예비 메모리용 4GB 보다 더 적을 수 있습니다 . Windows® 64 비트 운영체 제에는 그러한 제한이 없습니다 . ASRock XFast RAM 을 사용하여 Windows® 가 사용할 수 없는 메모리를 이용할 수 있습니다 .
  • Page 122 1.3 점퍼 설정 그림은 점퍼를 어떻게 설정하는지 보여줍니다 . 점퍼 캡을 핀에 씌우면 점퍼가 ì 단락î 됩니다 . 점퍼 캡을 핀에 씌우지 않으면 점퍼가 ì 단선î 됩니다 . 그림 은 3 핀 점퍼를 보여주며 핀 1 과 핀 2 는 점퍼 캡을 씌울 때 ì 단락î 됩니다 . Clear CMOS 점퍼...
  • Page 123 X99M Extreme4 1.4 온보드 헤더 및 커넥터 온보드 헤더와 커넥터는 점퍼가 아닙니다 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우지 마십시오 . 점퍼 캡을 온보드 헤더와 커넥터에 씌우면 마더보드가 영구 적으로 손상됩니다 . 시스템 패널 헤더 섀시의 전원 스위치 , 리...
  • Page 124 전원 LED 헤더 시스템 전원 상태를 나타 (3 핀 PLED1) 내려면 섀시 전원 LED 를 PLED- PLED+ (1 페이지 , 16 번 항목 참 이 헤더에 연결하십시오 . PLED+ 조 ) 시리얼 ATA3 커넥터 이들 열 개의 SATA3 커넥 터는 최대 6.0 Gb/s 데이 (S_SATA3_0_1: (1 페이지...
  • Page 125 X99M Extreme4 전면 패널 오디오 헤더 이 헤더는 오디오 장치를 PRESENCE# MIC_RET (9 핀 HD_AUDIO1) 전면 오디오 패널에 연결 OUT_RET (1 페이지 , 26 번 항목 참 하는 데 사용됩니다 . 조 ) OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. 고음질 오디오는 잭 감지를 지원하지만 올바르게 작동하려면 섀시의 패널 와...
  • Page 126 CPU 팬 커넥터 이 마더보드에는 4 핀 (4 핀 CPU_FAN1) CPU 팬 ( 저소음 팬 ) 커 (1 페이지 , 4 번 항목 참 넥터가 탑재되어 있습니 조 ) 다 . 3 핀 CPU 팬을 연결 CPU_FAN_SPEED FAN_SPEED_CONTROL 하려는 경우 핀 1-3 에 연 (3 핀...
  • Page 127 X99M Extreme4 시리얼 포트 헤더 이헤더는 시리얼 포트 모 RRXD1 DDTR#1 (9 핀 COM1) DDSR#1 듈을 지원합니다 . CCTS#1 (1 페이지 , 23 번 항목 참 조 ) RRI#1 RRTS#1 TTXD1 DDCD#1 TPM 헤더 이 커넥터는 키 , 디지털 인증...
  • Page 128 1.5 스마트 스위치 마더보드에는 스마트 스위치 이개 탑재되어 있습니다 : CMOS 초기화 스위치 및 BIOS 선택 스위치 한 개 . 이 스위 CMOS 값을 지우거나 다른 BIOS 로 부팅할 수 있습니다 . CMOS 지우기 스위치 CMOS 지우기 스위치 로 CMOS 값을 빨리 지 (CLRCBTN) (3 페이지...
  • Page 129 ASRock X99M Extreme4 ASRock X99M Extreme4 ASRock ASRock BIOS http://www.asrock.com. 1.1 パッケージの内容 • ASRock X99M Extreme4 • ASRock X99M Extreme4 • ASRock X99M Extreme4 • 1 x I/O • 1 x ASRock SLI_Bridge • 2 x ATA SATA • 1 x HDD...
  • Page 130 18-Core • • 12 • Intel® • Untied Overclocking • Intel® X99 • DDR4 • 4 x DDR4 DIMM • DDR4 3000+(OC)*/2933+(OC)/2800(OC)/2400 (OC)/2133/ 1866/1600/1333/1066 ASRock (http://www.asrock.com/) • ECC RDIMM DIMM • LGA 2011-3 Intel® Xeon® DDR4 ECC RDIMM • 64GB •...
  • Page 131 X99M Extreme4 • 7.1 CH HD Realtek ALC1150 • • ASRock • Purity Sound ™ 2 - SN 115dB - TI® NE5532 Ohms - EMI - PCB • DTS • 1 x Intel® I218V ( LAN PHY 10/100/1000 • 1 x Qualcomm® Atheros® AR8171 PCIE x1 LAN 10/100/1000 Mb/s •...
  • Page 132 • 10 x SATA3 6.0 Gb/s RAID RAID 0 RAID 1 RAID 5 RAID 10 Intel NCQ AHCI ASRock HDD S_SATA3_3 eSATA S_SATA3_2 Ultra M.2 Socket * RAID SATA3_0 ~ SATA3_5 • 1 x eSATA NCQ AHCI • 1 x M.2 SATA3 6.0 Gb/s...
  • Page 133 X99M Extreme4 • CPU/ • CPU/ • CPU/ • CPU/ • : +12V +5V +3.3V CPU • Microsot® Windows® 8.1 32 / 8.1 64 / 8 32 / 8 64 / 7 32 / 7 64 • FCC CE WHQL •...
  • Page 134 1.3 ジャンパー設定 CMOS (CLRCMOS1) CMOS p.1 No. 18 CLRCMOS1 CMOS CLRCMOS1 BIOS CMOS BIOS CMOS CMOS CMOS CMOS CMOS...
  • Page 135 X99M Extreme4 1.4 オンボードのヘッダーとコネクター PLED+ PLED- PWRBTN# p.1 No. 17 RESET# HDLED- HDLED+ PWRBTN RESET PLED S1/S3 HDLED...
  • Page 136 PLED1 PLED- PLED+ p.1 No. 16 PLED+ ATA3 SATA3 6.0 Gb/s (S_SATA3_0_1: p.1 No. 10 (S_SATA3_2_3: SATA p.1 No. 12 eSATA (SATA3_0_3: p.1 No. 13 (SATA3_1_4: SATA3_3 p.1 No. 14 (SATA3_2_5: p.1 No. 15 S_SATA3_2 * RAID SATA3_0 ~ SATA3_5 USB 2.0 USB_PWR USB5_6...
  • Page 137 X99M Extreme4 PRESENCE# MIC_RET OUT_RET HD_AUDIO1 p.1 No. 26 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 2. AC 97 A. Mic_IN (MIC) MIC2_L B. Audio_R (RIN) OUT2_R Audio_L (LIN) OUT2_L (GND) (GND) D. MIC_RET OUT_RET AC 97 Realtek FrontMic DUMMY SPEAKER SPEAKER1 DUMMY p.1 No.
  • Page 138 CPU_FAN1 p.1 No. 4 CPU_FAN_SPEED FAN_SPEED_CONTROL CPU_FAN2 p.1 No. 5 FAN_VOLTAGE FAN_SPEED ATXPWR1 p.1 No. 7 ATX12V ATX12V1 ATX12V p.1 No. 2 PCIe PCIE_PWR1 p.1 No. 25 +12V DETECT SATA_PWR_1 p.1 No. 11 hunderbolt AIC hunderbolt TBT1 p.1 No. 24 GPIO...
  • Page 139 X99M Extreme4 RRXD1 DDTR#1 DDSR#1 COM1 CCTS#1 p.1 No. 23 RRI#1 RRTS#1 TTXD1 DDCD#1 TPMS1 p.1 No. 6 PCIRST# FRAME PCICLK...
  • Page 140 1.5 スマートスイッチ CMOS BIOS CMOS BIOS CMOS CMOS CLRCBTN CMOS p.3 No. 14 BIOS BIOS (BIOS_SEL1) BIOS A BIOS B p.1 No. 27 BIOS BIOS_A BIOS BIOS_B BIOS BIOS BIOS BIOS BIOS BIOS UEFI BIOS BIOS BIOS BIOS LED BIOS_A_LED BIOS_B_LED BIOS...
  • Page 141 恕不另行通知。如果本手册有任何修改，则更新的版本将发布在华擎网站上，我 们不会另外进行通知。如果您需要与此主板相关的技术支持，请访问我们的网站 以具体了解所用型号的信息。您也可以在华擎网站上找到最新 VGA 卡和 CPU 支 持列表。华擎网站 http://www.asrock.com. 1.1 包装清单 • 华擎 X99M Extreme4 主板（Micro ATX 规格尺寸） • 华擎 X99M Extreme4 快速安装指南 • 华擎 X99M Extreme4 支持光盘 • 1 x I/O 面板 • 1 x 华擎 SLI_Bridge 卡 • 2 x 串行 ATA (SATA) 数据线（选购）...
  • Page 142 • 4 x DDR4 DIMM 槽 • 支持 DDR4 3000+(OC)*/2933+(OC)/2800(OC)/2400(OC)/ 2133/1866/1600/1333/1066 非 ECC ，非缓冲内存 * 請參閱華擎网站上的 Memory Support List（内存支持列表） 了解詳情。 (http://www.asrock.com/) • 支持非 ECC RDIMM（寄存型 DIMM） • 通 过 LGA 2011-3 Socket 中的 Intel® Xeon® 处 理器 E5 系列， 支持 DDR4 ECC、非 缓冲内 存 /RDIMM • 支持系统内存容量：...
  • Page 143 X99M Extreme4 • 具有内容保护功能的 7.1 CH 高清音频（ Realtek ALC1150 音 频 音频编解码器） • 优质 Blu-ray 音频支持 • 支持防突波 ( 华擎全防护 ) • 支持高保真 2 代 - Nichicon 专业音效电容 - 帶差分放大器的 115dB 信噪比數 / 模轉換器 - TI® NE5532 优质耳放（支持最高 600 Ohm 耳机）...
  • Page 144 • 10 x SATA3 6.0 Gb/s 接口，支持 RAID （ RAID 0 、 RAID 1 、 存 储 RAID 5 、 RAID 10 、 Intel Rapid Storage Technology 13 ）、 NCQ 、 AHCI 、热插拔和华擎硬盘管家 （ S_SATA3_3 接口与 eSATA 端口共用） （ S_SATA3_2 接口与 Ultra M.2 Socket 端口共用 * 仅...
  • Page 145 X99M Extreme4 • CPU/ 机箱温度感测 硬件 监 控 • CPU/ 机箱 / 电源风扇转速计 • CPU/ 机箱静音风扇（根据 CPU 温度自动调整机箱风扇 速度） • CPU/ 机箱风扇多种速度控制 • 电压监控： +12V 、 +5V 、 +3.3V 、 CPU 输入电压、 CPU 内 部电压 • Microsot® Windows® 8.1 32-bit / 8.1 64-bit / 8 32-bit / 8 64-bit 操作系统...
  • Page 146 1.3 跳线设置 此图显示如何设置跳线。 将跳线帽装到这些针脚上时，跳线 “ 短接 ” 。 如果这 些针脚上没有装跳线帽，跳线 “ 开路 ” 。 此图显示 3 针跳线，当跳线帽装在针 脚 1 和针脚 2 上，它们 “ 短接 ” 。 清除 CMOS 跳线 (CLRCMOS1) 默认 清除 CMOS （见第 1 页，第 18 个） CLRCMOS1 允许您清除 CMOS 中的数据。 要清除和重置系统参数到默认设 置，请关闭计算机，从电源上拔下电源线插头。...
  • Page 147 X99M Extreme4 1.4 板载接脚和接口 板载接脚和接口不是跳线。 不要将跳线帽装到这些接脚和接口上。 将跳线帽装 到这些接脚和接口上将会对主板造成永久性损坏。 系统面板接脚 按照下面的针脚分配， PLED+ PLED- (9 针 PANEL1) 将机箱上的电源开关、 PWRBTN# ( 见第 1 页，第 17 个） 重置开关和系统状态指 示灯连接到此接脚。 在 RESET# 连接线缆前请记下正负 HDLED- 针脚。 HDLED+ PWRBTN（电源开关）: 连接到机箱前面板上的电源开关。 您可以配置使用电源开关关闭系统的方式。 RESET（重置开关）: 连接到机箱前面板上的重置开关。 如果计算机死机，无法执行正常重新启动， 按重置开关重新启动计算机。 PLED（系统电源 LED）: 连接到机箱前面板上的电源状态指示灯。...
  • Page 148 电源 LED 接脚 请将机箱电源 LED 连接 (3 针 PLED1) 到此接脚以指示系统电 PLED- PLED+ PLED+ （见第 1 页，第 16 个） 源状态。 串行 ATA3 接口 这十个 SATA3 接口支持 (S_SATA3_0_1: 最高 6.0 Gb/s 数据传输 见第 1 页，第 10 个） 速率的内部存储设备的 (S_SATA3_2_3: SATA 数据线。 如果后面 见第...
  • Page 149 X99M Extreme4 前面板音频接脚 此接脚用于将音频设备 PRESENCE# MIC_RET (9 针 HD_AUDIO1) 连接到前音频面板。 OUT_RET （见第 1 页，第 26 个） OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. 高清音频支持插孔感测，但机箱上的面板连线必须支持 HDA 才能正常工作。 请按照我们的手册和机箱手册的说明安装系统。 2. 如果您使用 AC’97 音频面板，请按照以下步骤将它安装到前面板音频接脚： A. 将 Mic_IN (MIC) 连接到 MIC2_L。 B. 将 Audio_R (RIN) 连接到 OUT2_R，将 Audio_L (LIN) 连接到 OUT2_L。...
  • Page 150 CPU 风扇接口 此主板提供 4 针 CPU 风 (4 针 CPU_FAN1) 扇（静音风扇）接口。 见第 1 页，第 4 个） 如果您打算连接 3 针 CPU_FAN_SPEED CPU 风扇，请将它连接 FAN_SPEED_CONTROL (3 针 CPU_FAN2) 到针脚 1-3 。 见第 1 页，第 5 个） FAN_VOLTAGE FAN_SPEED ATX 电源接口 此主板提供 24 针 ATX 电 (24 针...
  • Page 151 X99M Extreme4 串行端口接脚 此接脚支持串行端口模 RRXD1 DDTR#1 DDSR#1 (9 针 COM1) 块。 CCTS#1 （见第 1 页，第 23 个） RRI#1 RRTS#1 TTXD1 DDCD#1 TPM 接脚 此接口支持 Trusted Platform (17 针 TPMS1) Module （信任平台模块， （见第 1 页，第 6 个） TPM ）系统，可以安全地存储 密钥、数字证书、密码和数据。 PCIRST# TPM 系统也可以帮助增强网络...
  • Page 152 1.5 智能开关 此主板配有 2 个智能开关：清除 CMOS 开关和 BIOS 选择开关，允许用户清除 CMOS 值或从不同 BIOS 进行引导。 清除 CMOS 开关 清除 CMOS 开关允许用 （CLRCBTN） 户快速清除 CMOS 值。 （参见第 3 页，第 14 个） 只有在关闭计算机并拔下电源插头后，才能使用此功能。 BIOS 选择开关 BIOS 选择开关，允许系统从 （BIOS_SEL1） BIOS A 或 BIOS B 中引导。 （见第...
  • Page 153 X99M Extreme4 電子信息產品污染控制標示 依據中國發布的「電子信息產品污染控制管理辦法」及 SJ/T 11364-2006「電 子信息產品污染控制標示要求」，電子信息產品應進行標示，藉以向消費者揭 露產品中含有的有毒有害物質或元素不致發生外洩或突變從而對環境造成污染 或對人身、財產造成嚴重損害的期限。依上述規定，您可于本產品之印刷電路 板上看見圖一之標示。圖一中之數字為產品之環保使用期限。由此可知此主板 之環保使用期限為 10 年。 圖一 有毒有害物質或元素的名稱及含量說明 若您慾了解此產品的有毒有害物質或元素的名稱及含量說明，請參照以下表格 及說明。 有害物質或元素 部件名稱 鉛 (Pb) 鎘 (Cd) 汞 (Hg) 六价鉻 (Cr(VI)) 多溴聯苯 (PBB) 多溴二苯醚 (PBDE) 印刷電路板 及電子組件 外部信號連 接頭及線材 O: 表示該有毒有害物質在該部件所有均質材料中的含量均在 SJ/T 11363-2006 標準規定...
  • Page 154 若您需要與本主機板相關的技術支援，請上我們的網站瞭解有關您使用機型的 特定資訊。您也可以在華擎網站找到最新的 VGA 卡及 CPU 支援清單。華擎網 站 http://www.asrock.com 1.1 包裝內容 • 華擎 X99M Extreme4 主機板（Micro ATX 尺寸） • 華擎 X99M Extreme4 快速安裝指南 • 華擎 X99M Extreme4 支援光碟 • 1 x I/O 面板外罩 • 1 x ASRock SLI_Bridge 卡 • 2 x Serial ATA (SATA) 資料纜線（選用）...
  • Page 155 X99M Extreme4 1.2 規格 • Micro ATX 尺寸 平台 • 高密度防潮纖維電路板 • 支援 LGA 2011-3 插座的 Intel® Core i7 與 Xeon® 18 核心 處理器系列 • 數位電源設計 (Digi Power) • 12 電源相位設計 • 支援 Intel® Turbo Boost 2.0 技術 • 支援非同步超頻技術...
  • Page 156 • 7.1 CH HD 音訊含內容保護（Realtek ALC1150 音訊轉碼 音訊 器）功能 • 高階藍光音訊支援 • 支援防突波 ( 華擎全防護 ) • 支援天籟美聲二代 - Nichicon Fine Gold 系列音效專用電容 - 115dB SNR DAC 與差分放大器 - TI® NE5532 高級耳機放大器（支援最高可達 600 Ohms 的耳機） - 直接驅動技術 - EMI 屏蔽蓋 - PCB 隔離屏蔽...
  • Page 157 X99M Extreme4 • 10 x SATA3 6.0 Gb/s 接頭可支援 RAID（RAID 0、RAID 儲存裝置 1、RAID 5、RAID 10、Intel 快速儲存技術 13 ）、NCQ、 AHCI、熱插拔及華擎硬碟守護神等 （S_SATA3_3 接頭與 eSATA 連接埠共用） （S_SATA3_2 接頭與 Ultra M.2 Socket 連接埠共用） * RAID 僅支援 SATA3_0 ~ SATA3_5 連接埠。 • 1 x eSATA 接頭，支援 NCQ、AHCI 及熱插拔...
  • Page 158 • Microsot® Windows® 8.1 32 位元 / 8.1 64 位元 / 8 32 位元 / 8 作業系統 64 位元 / 7 32 位元 / 7 64 位元 • FCC、CE、WHQL 認證 • ErP/EuP Ready（需具備 ErP/EuP ready 電源供應器） * 如需產品詳細資訊，請上我們的網站： http://www.asrock.com 請務必理解，超頻可能產生某種程度的風險，其中包括調整 BIOS 中的設定、 採用自由超頻技術或使用協力廠商的超頻工具。超頻可能會影響您系統的穩定 性，或者甚至會對您系統的元件及裝置造成傷害。您應自行負擔超頻風險及成 本。我們對於因超頻所造成的可能損害概不負責。 在 Windows® 32 位元作業系統下，因有保留供系統使用記憶體的限制，所以實...
  • Page 159 X99M Extreme4 1.3 跳線設定 圖例顯示設定跳線的方式。當跳線帽套在針腳上時，該跳線為「短路」。若沒 有跳線帽套在針腳上，該跳線為「開啟」。圖例顯示當 3-pin 跳線的跳線蓋套 在 pin1 及 pin2 時，這兩個針腳皆為「短路」。 清除 CMOS 跳線 (CLRCMOS1) 預設 清除 CMOS （請參閱第 1 頁，編號 18） 您可利用 CLRCMOS1 清除 CMOS 中的資料。若要清除及重設系統參數為預 設設定，請先關閉電腦電源，再拔下電源供應器的電源線。在等待 15 秒後， 請使用跳線帽讓 CLRCMOS1 上的 pin2 及 pin3 短路約 5 秒。不過，請不要在...
  • Page 160 1.4 板載排針及接頭 板載排針及接頭都不是跳線。請勿將跳線帽套在這些排針及接頭上。將跳線帽 套在排針及接頭上，將造成主機板永久性的受損。 系統面板排針 請依照以下的針腳排 PLED+ PLED- 列將機殼上的電源開 (9-pin PANEL1) PWRBTN# （請參閱第 1 頁， 編號 17） 關、重設開關及系統 狀態指示燈連接至此 RESET# 排針。在連接纜線之 HDLED- 前請注意正負針腳。 HDLED+ PWRBTN ( 電源開關 )： 連接至機殼前面板上的電源開關。您可設定使用電源開關關閉系統電源的方 式。 RESET ( 重設開關 )： 連接至機殼前面板上的重設開關。若電腦凍結且無法執行正常重新啟動，按下 重設開關即可重新啟動電腦。 PLED ( 系統電源 LED)： 連接至機殼前面板上的電源狀態指示燈。系統正在運作時，此...
  • Page 161 X99M Extreme4 電源 LED 排針 請將機殼電源 LED 連接至此排針，以 (3-pin PLED1) PLED- PLED+ PLED+ （請參閱第 1 頁，編號 16） 指示系統的電源狀 態。 Serial ATA3 接頭 這十組 SATA3 接頭 皆支援內部儲存裝 (S_SATA3_0_1: 請參閱第 1 頁，編號 10) 置的 SATA 資料纜 線，最高可達 6.0 (S_SATA3_2_3: 請參閱第 1 頁，編號 12）...
  • Page 162 前面板音訊排針 本排針適用於連接音 PRESENCE# MIC_RET 訊裝置至前面板音 (9-pin HD_AUDIO1) OUT_RET （請參閱第 1 頁，編號 26） 訊 。 OUT2_L J_SENSE OUT2_R MIC2_R MIC2_L 1. 高解析度音訊支援智慧型音效介面偵測 (Jack Sensing)，但機殼上的面板線必 須支援 HDA 才能正確運作。請依本手冊及機殼手冊說明安裝系統。 2. 若您使用 AC’97 音訊面板，請按照以下步驟安裝至前面板音訊排針： A. 將 Mic_IN (MIC) 連接至 MIC2_L。 B. 將 Audio_R (RIN) 連接至 OUT2_R 且將 Audio_L (LIN) 連接至 OUT2_L。 C.
  • Page 163 X99M Extreme4 CPU 風扇接頭 本主機板配備 4-Pin CPU 風扇 ( 靜音風 (4-pin CPU_FAN1) （請參閱第 1 頁， 編號 4） 扇 ) 接頭。若您計畫 連接 3-Pin CPU 風 CPU_FAN_SPEED FAN_SPEED_CONTROL 扇，請接至 Pin 1-3。 (3-pin CPU_FAN2) （請參閱第 1 頁， 編號 5） FAN_VOLTAGE FAN_SPEED ATX 電源接頭...
  • Page 164 序列連接埠排針 RRXD1 此排針支援序列連接 DDTR#1 DDSR#1 埠模組。 (9-pin COM1) CCTS#1 （請參閱第 1 頁，編號 23） RRI#1 RRTS#1 TTXD1 DDCD#1 TPM 標頭 此接頭支援信賴平台模組 (TPM) 系統，可確保儲存金 (17-pin TPMS1) （請參閱第 1 頁，編號 6） 鑰、數位憑證、密碼及資料 的安全。TPM 系統也能強 PCIRST# 化網路安全、保護數位身分 FRAME PCICLK 並確定平台完整性。...
  • Page 165 X99M Extreme4 1.5 智慧型開關 主機板設有兩個智慧型開關：清除 CMOS 開關及一個 BIOS 選擇開關，可讓使 用者清除 CMOS 值或從不同的 BIOS 開機。 清除 CMOS 開關 清除 CMOS 開關可 （CLRCBTN） 讓使用者迅速清除 （請參閱第 3 頁，編號 14） CMOS 值。 此功能唯有在將電腦關機，拔下電源供應器的插頭時才會作用。 BIOS 選擇開關 BIOS 選擇開關 可讓系統以 （BIOS_SEL1） BIOS A 或 BIOS B 開機。...
  • Page 166 • 4 x Slot DDR4 DIMM • Mendukung DDR4 3000+(OC)*/2933+(OC)/2800(OC)/240 0(OC)/ 2133/1866/1600/1333/1066 non-ECC, memori tanpa bufer * Lihat Datar Dukungan Memori pada situs web ASRock untuk informasi selengkapnya. (http://www.asrock.com/) • Mendukung non-ECC RDIMM (DIMM Terdatar) • Mendukung DDR4 ECC, memori tanpa bufer/RDIMM dengan prosesor Intel®...
  • Page 167 Panel I/O • 1 x Port SPDIF Out Optik Belakang • 1 x Konektor eSATA • 4 x Port USB 2.0 (Mendukung Perlindungan ESD (ASRock Full Spike Protection)) • 4 x Port USB 3.0 (Mendukung Perlindungan ESD (ASRock Full Spike Protection)) • 2 x Port LAN RJ-45 dengan LED (ACT/LINK LED dan...
  • Page 168 • 10 x Konektor SATA3 6.0 Gb/s, mendukung RAID (RAID 0, Penyim- panan RAID 1, RAID 5, RAID 10, Intel Rapid Storage Technology 13), NCQ, AHCI, Hot Plug, dan ASRock HDD Saver Technology (konektor S_SATA3_3 digunakan dengan port eSATA) (konektor S_SATA3_2 digunakan dengan port Ultra M.2 Socket) * RAID hanya didukung di slot SATA3_0 ~ SATA3_5.
  • Page 169 • FCC, CE, WHQL Sertiikasi • Siap untuk ErP/EuP (memerlukan catu daya untuk ErP/EuP) * Untuk informasi tentang produk rinci, kunjungi situs web kami: http://www.asrock.com Perlu diketahui, overclocking memiliki risiko tertentu, termasuk menyesuaikan peng- aturan pada BIOS, menerapkan Teknologi Untied Overclocking, atau menggunakan alat overclocking pihak ketiga.

  • Page 170: Contact Information

    Contact Information If you need to contact ASRock or want to know more about ASRock, you’re welcome to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer for further information. For technical questions, please submit a support request form at http://www.asrock.com/support/tsd.asp...

Table of Contents