Talkaround - Vertex Standard VX-4500 Operating Manual

Vertex standard two-way radio operating manual

Hide thumbs Also See for VX-4500:

Table of Contents

alk

rounD

Press (or press and hold) the assigned programmable key to activate the Talk

Around feature when you are operating on duplex channel systems (separate re-

ceive and transmit frequencies, utilizing a "repeater" station). The Talk Around

feature allows you to bypass the repeater station and talk directly to a station that

is nearby. This feature has no effect when you are operating on "simplex" chan-

nels, where the receive and transmit frequencies are already the same.

In the VX-4600 , when the "TA" function is activated, the " " icon will be indi-

cated on the display.

Note that your Vertex Standard may have made provision for "Talk Around" chan-

nels by programming "repeater" and "Talk Around" frequencies on two adjacent

channels. If so, the key may be used for one of the other Pre-Programmed Func-

tions.

Note: The Talk Around feature does not activate on the Simplex Channel.

eSet

Press (or press and hold) the assigned programmable key to reset the RFC (Ready

for Communication) condition.

all

Press (or press and hold) the assigned programmable key to send a 2-Tone or

5-Tone sequential burst which is pre-programmed.

own ( This function is only available in the VX-4600 )

oDe

Press (or press and hold) the assigned programmable key to select a 2-Tone or

5-Tone encode code from the pre-programmed encode list.

dVanced

VX-4500/-4600 S

peratIon

erieS

perating

anual

Table of Contents

Vx-4600