Enables the Layer 2 Tunneling Protocol (L2TP) for implementing virtual
L2TP
private networks. The service is provided in many European countries.
Figure 29: L2TP Configuration
The following items are displayed on this page:
Server IP — Sets the L2TP server IP Address. (Default: l2tp_server)
◆
User Name — Sets the L2TP user name for the WAN port.
◆
(Default: l2tp_user; Range: 1~32 characters)
Password — Sets a L2TP password for the WAN port. (Default:
◆
l2tp_password; Range: 1~32 characters)
Verify Password — Prompts you to re-enter your chosen password.
◆
Address Mode — Sets a L2TP network mode. (Default: Static)
◆
IP Address — Sets the static IP address. (Default: 0.0.0.0, available
◆
when L2TP Network Mode is set to static IP.)
Subnet Mask — Sets the static IP subnet mask. (Default:
◆
255.255.255.0, available when L2TP Network Mode is set to static IP.)
– 55 –
| Internet Settings
C
6
HAPTER
WAN Setting