O
M
C
PERATION
ODE
ONFIGURATION
The Operation Mode Configuration page allows you to set up the mode
suitable for your network environment.
Figure 24: Operation Mode
The following items are displayed on this page:
Bridge Mode — An access point mode that extends a wired LAN to
◆
wireless clients.
Router Mode — The internet gateway mode that connects a wired LAN
◆
and wireless clients to an Internet access device, such as a cable or
DSL modem. This is the factory set default mode.
WISP Mode — (Wireless Internet Service Provider mode) The 11n
◆
Router acts as a client connecting to an available wireless network
provided by another access point or wireless router. This functionality
allows other Ethernet-enabled devices, like gaming consoles, NAS
storage servers, or PCs/laptops without built-in wireless support, to be
added into a wireless network.
In order to connect to a wireless network in WISP mode, it is necessary
to know the following information: the network name (SSID), the
frequency channel (1-13), the type of security (WEP, WPA/ WPA2), and
the security password (if any). For more information, see
Wireless Configuration" on page
– 48 –
| Operation Mode
C
5
HAPTER
Operation Mode Configuration
87.
"WISP Mode