Feature Keys And Access Codes; Volume Keys; Sounds - Siemens Standard, Advance, Advance Plus, Advance Conference Telephone Manual

Audio Settings? (also available from the Program/Service
menu) lets you adjust the following audio settings for your
phone: ring volume, ring tone, alert tone volume, and
speakerphone mode.

Feature Keys and Access Codes

You can also press feature keys to gain access to Siemens
telephone system features such as Hold, Transfer, Mailbox, and
Program. Since your phone has already been assigned a set of
feature keys, it may not have some of the feature keys described
here. However, you may still use any feature available on your
system and permitted by your class of service by dialing its
feature access code, if it has one. This guide explains the basic
steps for using many features, including the default feature
access codes. Your system administrator may have configured
both the acronyms for feature keys and the access codes
differently from how they appear here.

Volume Keys

Use the Volume Up
the voice volume of your telephone. While on a call, press
to raise the volume of the voice you are hearing, or press
lower it. Press either key until you reach the desired voice level.
Holding down either key only changes the volume one step.
When you hang up or switch to another call, the voice volume
returns to the default level. Or you can store the new setting to
override the default setting before hanging up, by pressing the
(Select) key or by pressing the
together, before you hang up.

Sounds

Your phone makes different sounds to let you know what's
going on. Rings occur on a line that you are not using to indicate
that you have an incoming call. Tones occur while you are using
your phone and provide information about calls and features.
Table 2. Rings
Sound
Single (repeated)
'RXEOH UHSHDWHG
7ULSOH UHSHDWHG
+ and Volume Down
Meaning
,QWHUQDO RU (PHUJHQF\
FDOO
([WHUQDO FDOO
&DOOEDFN
-
keys to adjust
-
+ and keys
+
-
to
17