Operation
Group Scan(GS) Mode
To change between OS and GS scan;
1.
Press
four times.
GS setting ON or OFF will flash.
2.
Press
or
3.
Press and hold
To initiate scanning,
1.
When
is pressed during
Group Scan Mode, SCN will blink
and Group Scan Scanning begins.
2. To deactivate GS scanning, press
1. If SCAN is deactivated while it is tuned to an active
channel, the UH710SX-NB/UH720SX-NB will stay on that
active channel. If none of the channels re- active, the radio
will reinstate the Scan start channel.
NOTE
2. If GS Scanning is initiated when there are no channels
programmed in GS memory, an error tone will be heard and
scanning will not start.
UNIDEN UH720SX-NB/UH710SX-NB
to change the selection.
to save and exit.
or
17
.
UHF CB Radio