MSI WindBOX III MS-9A35 Manual page 37

▶
Suspend Mode
This item specifies the power saving modes for ACPI function. If your op-
erating system supports ACPI, you can choose to enter the Standby mode
in S1 (POS) or S3 (STR) fashion through the setting of this field.
▶
USB Device Wakeup From S3
This setting allows the activity of the USB device to wake up the system
from the S3 sleep state.
▶
Restore on AC Power Loss
This setting specifies whether your system will reboot after a power failure
or interrupt occurs. Available settings are:
[Power Off]
[Power On]
[Last State]
▶
Resume On LAN
This field specifies whether the system will be awakened from power sav-
ing modes when activity or input signal of onboard LAN is detected.
▶
Resume On RTC Alarm
When [Enabled], your can set the date and time at which the RTC (real-
time clock) alarm awakens the system from suspend mode.
▶
Super IO Configuration
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the previous status before
power failure or interrupt occurred.
MS-9A35
3-9