Section 5: Remote Operation
Before using the Web UI, please check the IP address of the NVR. To check the IP address, press
MENU key on the unit and enter username and password to access the OSD setup menu. Select
System, Network Setup, then LAN Setup to check the IP.
Start Internet Explorer by clicking on the desktop icon, or by using the Start menu to access it.
The PC needs to be set to accept ActiveX plug-ins. Please follow the steps to set the Internet
security settings appropriately.
Note:
Internet Explorer provides the ActiveX component that is required when using the remote
monitoring software.
Select Tools from the main menu of the browser, then Internet Options, and then click the
Security tab.
Select Trusted sites and click Sites to specify its security setting.
D-Link DNR-2060-08P User Manual
Web UI Setup
Change Internet Settings
80