Function Keys - D-Link DNR-2060-08P User Manual

Section 2: System Setup
This section describes the function keys for normal operation, on the front panel of the NVR.
POWER
CHANNEL
COPY
DOME
MODE
PLAY
FREEZE
SEQ (Sequence) Press to start automatic sequence display of video from all installed cameras.
SEARCH
MENU
D-Link DNR-2060-08P User Manual

Function Keys

After the power cord is correctly connected,press this key to switch power on.
Press and hold this key to quick shutdown the NVR.
In both Live and Playback modes, press the CHANNEL key to view the corresponding
video in full-screen. The number of the CHANNEL keys corresponds to the number of
cameras supported by the unit.
In Dome Control mode, the key "1" is used to access the Set/Go preset menu; the keys
"11" ~ "16" are for quick access of preset points 1~6.
In Playback mode, press this key to select the start and end time of the export video.
Refer to section Video Export for detailed information.
Press the key to enter Dome Control mode. Please refer to Section Dome Control for
detailed controlling operation.
Press repeatedly to select desired main monitor display format. According to the
monitor displaying type, there are several available viewing modes: full-screen,
2-windows, and 8-windows. Refer to section Viewing Modes for detailed information.
Press this key to switch between live image and playback video.
Note: The video of latest 5~10 minutes cannot be played back because the video is still
saved in the buffer.
Press FREEZE while viewing live image, the live video will be frozen. The date / time
information shown on the monitor will continue updating, as well as the recording
of video. Press FREEZE again to return to live mode. Press FREEZE while playing the
recorded video, the playback video will be paused. Press LEFT / RIGHT to move the
recorded video reverse / forward by single step. Press FREEZE again to continue
playing video.
In both Playback and Live mode, press SEARCH to enter the Search menu for
searching and playing back recorded video by date / time, event, or text.
Press this key to enter the OSD setup menu.
18