D-Link DAP-1520 User Manual page 25

Section 3 - Configuration
Note: You can also use the WPS button on the side of the DAP-1520
to initiate a WPS connection with the uplink router. After pressing
the WPS button on the DAP-1520, you will have 120 seconds to
press the WPS button on your access point or router. The LED on
the DAP-1520 will turn solid green when a connection has been
successfully established with your router. Refer to
Wireless Client" on page 42.
Once your connection has been established, you can then enter
your Extended Network settings for both 2.4GHz and 5GHz. Click
Next.to continue.
D-Link DAP-1520 User Manual
WPS Button
"Connecting to a
21