Resetting The Microcomputer; Transporting The Unit - Kenwood XD-A75 XD-A55 Instruction Manual

RESETTING THE MICROCOMPUTER

POWER
ON/STANDBY
7 STOP

TRANSPORTING THE UNIT

POWER
ON/STANDBY
CD
28 EN
SOUND
MODE
0 OPEN/CLOSE
Reset the microcomputer under the following con-
ditions :
•
To erase all of the stored memory contents (clock
and timer settings, and tuner and CD presets).
•
If the display is not correct.
•
If the operation is not correct.
1
Press the POWER / ON/STANDBY button to en-
ter the standby mode.
2
Whilst pressing down the 7 STOP button and
the SOUND MODE button, hold down the
POWER / ON/STANDBY button for at least 1
second.
•
"CLEAR AL " will appear.
Caution :
•
The operation explained above will erase all data
stored in memory including clock and timer set-
tings, and tuner and CD presets.
Before you move this product to a new location,
proceed as follows :
1
Press the POWER / ON/STANDBY button to turn
the power on.
2
Press the CD button.
3
Press the 0 OPEN/CLOSE button to open the
disc tray.
•
Remove all CDs inserted in the unit.
4
Press the 0 OPEN/CLOSE button to close the
disc tray.
•
Make sure that "NO DISC" is displayed.
5
Press the POWER / ON/STANDBY button to
enter the standby mode and then unplug the AC
power cord from the AC socket.