Receiving Broadcast Station - Kenwood XD-251 Instruction Manual

Receiving broadcast station

20
It is also possible to receive them by one-touch operations by
storing up to 30 stations in the preset memory.
To increase
frequency
To decrease
frequency
Remote control only
4
P.CALL
Select the tuning mode.
AUTO/MONO
2
CD/TUNER
1
1. Select the broadcast band.
Each press changes the band.
1 FM
BAND
2 AM
2. Select a station.
When no stations have been memorized
TUNING
Auto tuning
Manual tuning : Press the key repeatedly or hold it depressed until a station is
When stations have been memorized (preset call)
Every time the key is pressed, the preset stations are switched over as follows.
¢
Press ¢
Press 4
Each press alternates the mode.
1 "AUTO" lit (Auto tuning)
2 "AUTO" not lit (Manual tuning)
Use the manual tuning mode when reception is noisy due to weak reception.
(In the manual mode, stereo broadcasts are received in monaural.)
÷ Normally, use the AUTO (Auto tuning) mode.
When the BAND key is pressed, this unit will be
switched on automatically.
Select the tuning
mode
4 ¢
2
¶ 3 1 ¡
1 FM
or
2 MW (AM)
3 LW
1 FM
or
2 MW (AM)
3 SW
: Each press receives the next station.
received.
PRESET indicator
for the order of 1=2=3 ... 29=30=1...
for the order of 30=29=28 ... 2=1=30...
0 7 6
1
2
7/0 8 3 1 ¡ 7/0 8
Example when an FM station is received
MEMORY PROGRAM STEREO TIMER
PRESET REPEAT 1 AUTO
AUTO PAUSE ALL DISC RANDOM FLAT
DISC MEMORY STOP P.B.C AUTO
Frequency display
Lights during stereo reception
MEMORY PROGRAM STEREO TIMER
PRESET REPEAT 1 AUTO
AUTO PAUSE ALL DISC RANDOM FLAT
DISC MEMORY STOP P.B.C AUTO
Lights during auto tuning.
XD SERIES (En)
SLEEP EX.BASS
PRESET EQ
ROCK POP JAZZ
PAL NTSC L R
kHz
MHz
SLEEP EX.BASS
PRESET EQ
ROCK POP JAZZ
PAL NTSC L R
kHz
MHz