Set Up Voicemail - Kyocera Boost Hydro edge User Manual

Slide the battery cover lock to the locked position.
l
Note: When you insert the battery, your phone may power on automatically.
2. Charge your battery.
Plug the smaller end of the USB cable into the phone's charger/accessory jack.
l
Plug the other end of the USB cable into the charger, and then plug the charger into an
l
electrical outlet.
Note: Your phone's battery should have enough charge for the phone to turn on and find a signal,
set up voicemail, and make a call. You should fully charge the battery as soon as possible.
3. Press and hold the Power button to turn the phone on.
If your phone is activated, it will turn on and search for the service.
l
If your phone is not yet activated, refer to your Activation Guide for more information.
l

Set Up Voicemail

Setting up Visual Voicemail follows many of the same procedures as setting up traditional
voicemail. You should set up your voicemail and personal greeting as soon as your phone is
activated. Your phone automatically transfers all unanswered calls to your voicemail, even if your
phone is in use or turned off.
Note: To set up your traditional voicemail box, see Voicemail (Traditional).
To set up Visual Voicemail:
1. Touch Home
and hold the screen and then flick the key icon
unlock the screen.)
Get Started
> > Voicemail. (If your screen is locked, press the Power button, touch
under your finger toward Unlock to
4