Keyguard; Text Entry - Kyocera payLo User Manual

5. To purchase the ringtone, select Buy and follow the onscreen instructions to complete the download.
6. When the download is finished, select an option to continue:
Listen to listen to the ringtone.
l
Assign to assign the ringtone to a call or message type or to a specific contact.
l
Continue to browse for other items to download.
l

Keyguard

Use Keyguard to lock the side buttons and the keys on the front panel to prevent accidental key presses.
Enable Keyguard
Note: You cannot enable keyguard while the QWERTY keyboard is open.
From standby mode, press and hold
n
– or –
From standby mode, press
goes off. If the Backlight Dim setting is set to Always Bright, the keyguard will be enabled after one
minute in idle state. See
Disable Keyguard
Press >
n
– or –
Slide out the QWERTY keyboard.
The keyguard will be disabled if you respond to the incoming call or notifications for alarms and
countdown timer.

Text Entry

The Text Entry menu allows you to specify a suitable feature during the text entry process. See
Entry Options for the options available from the text entry screen.
1. From standby mode, press
2. Select an option:
Settings
to enable keyguard immediately.
> Settings > Keyguard > On to enable keyguard when the backlight
Change the Backlight
.
> Settings > Text Entry.
Settings.
Text
82