1200 Base Cover Assembly And Dc-In Connector - Lenovo B430 Hardware Maintenance Manual

1200 Base cover assembly and DC-in connector

For access, remove these FRUs in order:
• "1010 Battery pack" on page 58
• "1020 Large bottom cover" on page 59
• "1030 Small bottom cover" on page 60
• "1040 Optical drive or blank bezel" on page 60
• "1060 Hard disk drive assembly" on page 62
• "1070 PCI Express Mini Card for wireless LAN" on page 64
• "1080 Backup battery" on page 65
• "1090 Thermal fan" on page 66
• "1100 Thermal pipes" on page 67
• "1110 Keyboard" on page 69
• "1120 Keyboard bezel assembly, card reader, touch pad, and dummy cap" on page 72
• "1140 System board assembly" on page 77
• "1150 Speaker assembly" on page 80
• "1160 Power button sub card" on page 82
• "1170 I/O sub card with USB connector and audio jack" on page 82
• "1180 RJ45 sub card" on page 84
• "1190 LCD unit" on page 86
Removal steps of base cover assembly and DC-in connector
Applying labels to the base cover
The new base cover FRU is shipped with a kit containing labels of several kinds.
The following illustration shows the correct location of each label.
.
Chapter 9 Removing or replacing a FRU
89